Enhanced performance of SERDES current-mode output driver using 0.13 μm PD SOI CMOS
نویسنده
چکیده
A current-mode output driver that supports SERDES applications is implemented using 0.13 μm Bulk and PD SOI CMOS technologies. Schematic simulation results confirm the enhanced performance of PD SOI for very high-speed interfaces. The PD SOI current-mode driver shows a 3 times lower data dependent jitter than the Bulk current-mode driver at the same 3.125 Gbps data rate of XAUI standard.
منابع مشابه
Voltage Regulation of a Negative Output Luo Converter Using a PD-PI Type Sliding Mode Current Controller
This paper describes a new design for direct sliding mode method with a high switching frequency using the PD-PI type sliding surface applied to a negative output Luo converter worked in continuous current mode for applications required constant power source such as aerospace applications, medical equipment and etc. Because of the output power and line changes, the converter model is also nonli...
متن کامل10-Gb/s Optical Receiver and VCSEL Driver in 0.13-μm CMOS Technology
10-Gb/s Optical Receiver and VCSEL Driver in 0.13-μm CMOS Technology
متن کاملImproved Precoder Architecture for Duobinary Transceivers
Duobinary modulation is an attractive baseband modulation scheme for high-speed serial data transmission. This work presents a duobinary transceiver with a new precoder architecture that overcomes the glitch vulnerability of the conventional ones. It has been fabricated in a 0.13-μm PD-SOI CMOS technology and achieves 10 Gbps consuming 37 mW.
متن کاملDesign and Verification of a High Performance LED Driver with an Efficient Current Sensing Architecture
A high power buck-boost switch-mode LED driver delivering a constant 350 mA with a power efficient current sensing scheme is presented in this paper. The LED current is extracted by differentiating the output capacitor voltage and maintained by a feedback. The circuit has been fabricated in a standard 0.35 μm AMS CMOS process. Measurement results demonstrated a power-conversion efficiency over ...
متن کاملA High-Temperature, High-Voltage Linear Regulator in 0.8-μm BCD-on-SOI
The sale of hybrid electric vehicles (HEVs) has increased 10 fold from the year 2001 to 2008 [1]. Thus, high temperature electronics for HEV applications are desired in the engine compartment, power train, and brakes where the ambient temperature normally exceeds 150°C. Power converters (i.e. DC-DC converter, DC-AC inverter) inside the HEVs require Gate-Driver ICs to control the power switches....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009