Design and Implementation of an Interpolator Using Wave Digital Filters
نویسندگان
چکیده
The design and implementation of an interpolator using wave digital filters is presented. The interpolator increases the sample frequency with a factor of 4, from 800 kHz to 3.2 MHz. The design approach yields implementations with low power consumption and small chip area. The excellent stability and sensitivity properties of wave digital filters are retained.
منابع مشابه
Implementation of Bit-parallel Lattice Wave Digital Filters
In this paper we present arithmetic transformations of firstand second-order allpass sections for increased maximal sample rate. Also the implementation of a combined interpolator and decimator for an OFDM based communication system is presented. The arithmetic transformations were applied to the second-order allpass sections of the implemented filter, yielding a 40% increase of the maximal sam...
متن کاملLow latency IIR digital filter design by using metaheuristic optimization algorithms
Filters are particularly important class of LTI systems. Digital filters have great impact on modern signal processing due to their programmability, reusability, and capacity to reduce noise to a satisfactory level. From the past few decades, IIR digital filter design is an important research field. Design of an IIR digital filter with desired specifications leads to a no convex optimization pr...
متن کاملDesign of IIR Digital Filter using Modified Chaotic Orthogonal Imperialist Competitive Algorithm (RESEARCH NOTE)
There are two types of digital filters including Infinite Impulse Response (IIR) and Finite Impulse Response (FIR). IIR filters attract more attention as they can decrease the filter order significantly compared to FIR filters. Owing to multi-modal error surface, simple powerful optimization techniques should be utilized in designing IIR digital filters to avoid local minimum. Imperialist compe...
متن کاملOne Method For Design of Lowpass Narrowband Filters
This paper presents a lowpass narrowband filter design method with a small number of products per output sample (MPS). The method is based on the use of a sharpened Cascade Integrator-Comb (CIC) filter and an Interpolated Finite Impulse Response (IFIR) structure. INTRODUCTION In many communications and signal processing systems it is necessary to isolate a very narrow band signal from a very wi...
متن کاملDesign and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE)
Radar Signal Processing has been an interesting area of research for realization of programmable digital signal processor using VLSI design techniques. Digital Signal Processing (DSP) algorithms have been an integral design methodology for implementation of high speed application specific real-time systems especially for high resolution radar. CORDIC algorithm, in recent times, is turned out to...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007