The Enhanced Measurements of Laser Micro-Jet Processing

نویسندگان

  • Xizhao Lu
  • Haihe Xie
  • Chun Lin
  • Yuanqing Huang
چکیده

In the paper, the enhanced measurements of the laser micro-jet processing are discussed. In fact, within pure water breakdown threshold of laser, the less focal which focused with the appropriate focusing lens and the small nozzle of water chamber enhance the laser power density ,at the same time, the laser beam transport in the wave guided water with the proper total reflection angle. The laser power which depended on the properties of the diameter, the coupling water chamber and the coupling efficiency of the micro-jet and laser beam expect of the properties of laser.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Laser-induced liquid-phase jet-chemical etching of metals

In this treatment method laser radiation, which is guided from a co-axially expanding liquid jet-stream, locally initiates on a metal surface a thermochemical etching reaction, which leads to selective material removal. Time-resolved measurements of the electrical potential were correlated with the specific processing parameters to identify conditions for stable and enhanced chemical etching re...

متن کامل

LDA Experimental Data of Three-Poster Jet Impingement System

During its near-ground hovering phase a Short Take-Off and Vertical Landing (STOVL) aircraft creates a complex three-dimensional flow field between jet streams, the airframe surface and the ground. A proper understanding and numerical prediction of this flow is important in the design of such aircraft. In this paper an experimental facility, used to gather validation data suitable for testing C...

متن کامل

Tensile properties and fatigue behavior of AHSS-DP 350/600 subjected to laser shock processing

This work presents the effects of strain rate on the tensile properties and fracture morphologies of AHSS-DP 350/600 subjected to LSP. Fatigue crack growth test was performed to evaluate fatigue behavior in the metallic plate of AHSS-DP350/600. However, this material is used in automobile industry and enhancing it fatigue resistance is a challenge in material engineering. In order to evaluate a...

متن کامل

DYE JET VELOCITY DISTRIBUTION MEASUREMENTS USING PHOTOTHERMAL DEFLECTION SPECTROSCOPY

We demonstrate that photothermal deflection spectroscopy can be used to measure velocity distributions in dye jets. Such measurements are useful in determining the quality of flow in dye jets, The quality of jets is very important for a stable and naanow linewidth operation of dye lasers

متن کامل

Fabrication of Micro-Scale Gratings by Nanosecond Laser and Its Applications for Deformation Measurements

This paper experimentally investigated the fabrication and optimization of micro-scale gratings formed by nanosecond laser etching. The mechanism of nanosecond laser processing and the geometric phase analysis (GPA) are discussed, and the factors influencing the fabrication process including laser energy, laser fluence, and ablation threshold of material, are experimentally studied. In order to...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011