Grain-size dependence of intergranular magnetic correlations in nanostructured metals

نویسندگان

  • Jörg F. Löffler
  • Werner Wagner
  • Gernot Kostorz
چکیده

Magnetic small-angle neutron scattering experiments were performed on nanostructured Fe, Co and Ni samples of varying grain size, produced by inert-gas condensation. The experiments show that the spontaneous spatial magnetic correlations forming in zero-field extend over many individual grains. These correlations depend strongly on grain size. In Fe, they have a minimum at a grain size of around 35 nm and increase sharply for smaller grain sizes. The crossover occurs at grain sizes comparable with Lcrit = π δ, where δ is the bulk domain-wall width. For grain sizes below Lcrit, the results are explained on the basis of the random-anisotropy model, which takes into account that the magnetic alignment between the grains competes with the anisotropies of the individual grains. Above Lcrit, where domain walls can form within one grain, the magnetization direction corresponds to the anisotropy direction varying from grain to grain, and the magnetic correlation length increases approximately linearly with grain size. Furthermore, the measurements on Fe, Co and Ni show that the spatial magnetic correlations measured by SANS are always larger than Lcrit. This is in agreement with results of theoretical studies showing that nonuniform magnetization configurations can only exist in grains with sizes D > Lcrit.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

بررسی اثر اندازه پودرهای اولیه در ریز ساختار و خواص بین دانه‌ای ابررساناهای2223(Bi-Pb)

 We have studied the effect of precursor powder size on the microstructure and intergranular behavior of polycrystalline Bi2223 superconductors using the XRD, SEM, electrical resistivity and AC susceptibility techniques. Polycrystalline Bi2223 superconductors were prepared from the powders with different milling times. The XRD results show that by decreasing the precursor powder size the Bi2223...

متن کامل

High-Temperature Stability and Grain Boundary Complexion Formation in a Nanocrystalline Cu-Zr Alloy

Nanocrystalline Cu-3 at.% Zr powders with 20 nm average grain size were created with mechanical alloying and their thermal stability was studied from 550–950 C. Annealing drove Zr segregation to the grain boundaries, which led to the formation of amorphous intergranular complexions at higher temperatures. Grain growth was retarded significantly, with 1 week of annealing at 950 C, or 98% of the ...

متن کامل

Manipulating the interfacial structure of nanomaterials to achieve a unique combination of strength and ductility

The control of interfaces in engineered nanostructured materials has met limited success compared with that which has evolved in natural materials, where hierarchical structures with distinct interfacial states are often found. Such interface control could mitigate common limitations of engineering nanomaterials. For example, nanostructured metals exhibit extremely high strength, but this benef...

متن کامل

Magnetoresistance of polycrystalline Fe3O4 films prepared by reactive sputtering at room temperature

The magnetic, structural, and transport properties of single-layer magnetite sFe3O4d films prepared by reactive sputtering were investigated. Magnetoresistance sMRd was measured at various thicknesses and temperatures. The increase in MR with thickness is related to grain crystallinity and size, as confirmed by transmission electron microscopy. MR arises from intergranular tunneling, which is s...

متن کامل

Evaluation of Forging Strain for Maximum Grain Size in Open-Die Forged 6061 Aluminum

In an effort to maximize grain growth of open-die forged 6061 aluminum alloy parts, samples from three of Weber Metals’s suppliers (Hidal Co-Almex USA Inc., TST Inc., and Vista Metals Corp.; to be called Supplier H, Supplier T, Supplier V respectively) were cut into cylinders with diameters of 0.75 ̋ and heights of 2 ̋, and put through a simulated forging process and heat treatment. It is possibl...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2000