The Spacer Thickness Effects on the Electroluminescent Characteristics of Hybrid White Organic Light-emitting Diodes
نویسندگان
چکیده
The authors have demonstrated the various characteristics of hybrid white organic light-emitting diodes (HWOLED) using fluorescent blue and phosphorescent red emitters. We also demonstrated that two devices showed different characteristics in accordance with thickness of the 4,4′-N,N′-dicarbazole-biphenyl (CBP) spacer (CS) inserted between the blue and the red emitting layer. It was found that the device with a CS thickness of 70 Å showed a current efficiency 2.5 times higher than that of the control device with a CS thickness of 30 Å by preventing the triplet Dexter energy transfer from the red to the blue emitting layer. The HWOLED with the CS thickness of 70 Å exhibited a maximum luminance of 24500 cd/m, a maximum current efficiency of 42.9 cd/A, a power efficiency of 37.5 lm/W, and Commission Internationale de I'Eclairage coordinates of (0.37, 0.42). [DOI: 10.4313/TEEM.2009.10.6.208]
منابع مشابه
Thin-film Encapsulation of Organic Light-Emitting Diodes Using Single and Multilayer Structures of MgF2, YF3 and ZnS
In this research, the lifetime of green organic light emitting diodes (OLEDs) is studied using four passivation layers. To encapsulate the OLEDs, MgF2, YF3, composed of alternating MgF2/ZnS and YF3/ZnS layers were grown by thermal vacuum deposition. Measurements show that the device lifetime is significantly improved by using YF3 and ZnS as passivation layers. However, diodes encapsulated by Mg...
متن کاملHighly Efficient White Organic Light-Emitting Diodes with Ultrathin Emissive Layers and a Spacer-Free Structure
Ultrathin emissive layers (UEMLs) of phosphorescent materials with a layer thickness of less than 0.3 nm were introduced for high-efficiency organic light-emitting diodes (OLEDs). All the UEMLs for white OLEDs can be prepared without the use of interlayers or spacers. Compared with devices fabricated with interlayers inserted in-between the UEMLs, our spacer-free structure not only significantl...
متن کاملOptimized efficiency and angular emission characteristics of white top-emitting organic electroluminescent diodes
The concept of an additional capping layer, which is deposited onto the semitransparent top contact, is applied to minimize microcavity effects for white light emission from top-emitting organic light emitting devices OLEDs . The influence on the optical properties of such devices with silver as top electrode material is discussed using an analytical method and numerical simulations. The result...
متن کاملEffect of temperature and strain on the optical polarization of (In)(Al)GaN ultraviolet light emitting diodes
Related Articles Silicon nanoparticle-ZnS nanophosphors for ultraviolet-based white light emitting diode J. Appl. Phys. 112, 074313 (2012) Strong light-extraction enhancement in GaInN light-emitting diodes patterned with TiO2 micro-pillars with tapered sidewalls Appl. Phys. Lett. 101, 141105 (2012) Electron injection in magnesium-doped organic light-emitting diodes Appl. Phys. Lett. 101, 141102...
متن کاملEffects of emissive layer architecture on recombination zone and Förster resonance energy transfer in organic light-emitting diodes
Recombination zone and Förster resonance energy transfer (FRET) in multilayer organic light-emitting diodes (OLEDs) were investigated. Basis device architecture is indium tin oxide (ITO)/N, N0-diphenyl-N, N0-bis(1-naphthyl-phenyl)-1, 10-biphenyl-4, 40-diamine (NPB)/4-(dicyanomethylene)-2-tert-butyl-6-(1, 1, 7, 7tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB)/NPB (spacer)/tris-(8-hydroxyl quinolin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009