Cotton fabric-based electrochemical device for lactate measurement in saliva.

نویسندگان

  • Radha S P Malon
  • K Y Chua
  • Dedy H B Wicaksono
  • Emma P Córcoles
چکیده

Lactate measurement is vital in clinical diagnostics especially among trauma and sepsis patients. In recent years, it has been shown that saliva samples are an excellent applicable alternative for non-invasive measurement of lactate. In this study, we describe a method for the determination of lactate concentration in saliva samples by using a simple and low-cost cotton fabric-based electrochemical device (FED). The device was fabricated using template method for patterning the electrodes and wax-patterning technique for creating the sample placement/reaction zone. Lactate oxidase (LOx) enzyme was immobilised at the reaction zone using a simple entrapment method. The LOx enzymatic reaction product, hydrogen peroxide (H2O2) was measured using chronoamperometric measurements at the optimal detection potential (-0.2 V vs. Ag/AgCl), in which the device exhibited a linear working range between 0.1 to 5 mM, sensitivity (slope) of 0.3169 μA mM(-1) and detection limit of 0.3 mM. The low detection limit and wide linear range were suitable to measure salivary lactate (SL) concentration, thus saliva samples obtained under fasting conditions and after meals were evaluated using the FED. The measured SL varied among subjects and increased after meals randomly. The proposed device provides a suitable analytical alternative for rapid and non-invasive determination of lactate in saliva samples. The device can also be adapted to a variety of other assays that requires simplicity, low-cost, portability and flexibility.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ink-Jet Printing Cotton with Cationic Reactive Dye Based Inks

The current commercial application of ink-jet reactive inks to cotton fabrics has been through pre-treating with pad liquor prior to printing. In This study made an effort to provide a single phase ink-jet printing process for printing cotton fabric using the novel cationic reactive dye in ink’s formulation. Cotton fabric was printed upon with the novel cationic reactive dye and commercial anio...

متن کامل

Effects of Polycarboxylic acids on Untreated Cotton and Solubilised Sulphur Dyed Cotton

A number of polycarboxylic acids butane tetracarboxylic acid BTCA, polyacrylic-co-maleic acid PAMA, citric acid, maleic-itaconic MA-IA were examined, in combination with sodium hypophosphite SHP in order to give a similar high fabric crease recovery performance and whiteness index to traditional formaldehyde based crease agents. BTCA showed to be the best crease resist agent for crosslinking co...

متن کامل

Investigation into the Curling Intensity of Polyester/Cotton Single Jersey Weft Knitted fabric Using Finite Element Method

Curling of knitted fabrics edges is one of the complicated problems of these structures. Therefore, study and measurement of curling in knitted fabrics is important. In this study, it is tried to model the three-dimensional wale wise curl of the fabric using finite element modelling. In this model the tensions in different parts of a knitted loop due to bending and torsional forces in knitting ...

متن کامل

Preparation and Characterization of a Cotton-Based Nanocomposite Hydrogel

In this work, hydrogel nanocomposites were synthesized by solution polymerization of acrylic acid (AA) and itaconic acid (IA) in the presence of cotton fabric. Ammonium persulfate (APS) was used as the polymerization initiator in the presence of a crosslinker, methylene bisacrylamide (MBA). Insertion of Ag followed by reduction of Ag+ cations results in a hydrogel nanocomposite. The ...

متن کامل

Microwave Assisted Appraisal of Neem Bark Based Tannin Natural Dye and its Application onto Bio-mordanted Cotton Fabric

The current study is aimed to utilize the microwave for isolation of colorant from neem bark and its application onto chemical & bio-mordanted cotton fabric. For the purpose, aqueous, acid and organic media have been employed to isolate the colorant and to make its application onto surface modified and bio-mordanted cotton fabric followed by microwave treatment up to 6min....

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Analyst

دوره 139 12  شماره 

صفحات  -

تاریخ انتشار 2014