Modeling the Random Component of Manufacturing Yield of Integrated Circuits
نویسندگان
چکیده
A model is created for the number of integrated circuits that are good from each wafer on which they are fabricated. The goal is to separate the random or common cause loss from the systematic or special loss. The random loss from this type of process is modeled so that false alarms indicating systematic loss are less likely to occur and so that the structure of the systematic loss can be determined. Keywords— Baseline randomness, modeling, skewness, systematic loss, yield curve.
منابع مشابه
A MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کاملIntegrated Nanowire Systems for Post-CMOS Computing
CMOS faces new device and technology challenges: MOSFETs require ultra-sharp doping profiles and complex processing; integration of devices into circuits requires arbitrary interconnection with overlay precision beyond known manufacturing solutions (3σ=±3nm, 16nm CMOS, ITRS’11[1]). To overcome these challenges, we propose a new nanoscale computing fabric with integrated design of device, interc...
متن کاملJose Pineda de Gyvez
As the complexity of integrated circuits advances toward submicron technologies with high transistor densities in the order of 10 elements, the integration between process technology and system design becomes a relevant issue. This book addresses the study of process and design variables in order to determine the ease and feasibility of fabrication—or manufacturability—of contemporary Very Larg...
متن کاملImproved Yield Model for Submicron Domain
This paper describes a new manufacturing yield model for submicron VLSI circuits. This model attempts to handle process induced differences between IC layout and actual IC topography. The presented model focuses on the random nature of over and under etching phenomenon. The relevance of the new yield model in submicron domain is analyzed. Examples of yield calculations using the proposed model ...
متن کاملIntegrated Approach for Cellular Manufacturing a Case Study (TECHNICAL NOTE)
To cope with fast changing customer requirements, industrial demands and to meet stringent specifications of customers Cellular Manufacturing Systems has become an effective tool in hands of manufacturers. Most of the published literature on cell formation earlier considers only the data available in the route sheets and ignored subproblems associated with cell formation. There is a need to dev...
متن کامل