Reformer and Membrane Modules (RMM) for Methane Conversion Powered by a Nuclear Reactor
نویسندگان
چکیده
منابع مشابه
Methane and Methanol Steam Reforming in a Membrane Reactor for Efficient Hydrogen Production and Continuous Fuel Cell Operation
Our goal in this paper is the description and analysis of new findings and results on membrane reactors and catalytic reactors/heterogeneous processors for the steam reforming reactions of methane, natural gas, and methanol for use in power generation systems and fuel cells. The current communication continues this research by giving emphasis in the so-called “Improved Reaction” and “ReformingF...
متن کاملPure Hydrogen Production in Membrane Reactor with Mixed Reforming Reaction by Utilizing Waste Gas: A Case Study
A rise in CO2 and other greenhouse gases’ concentration from gas refinery flares and furnaces in the atmosphere causes environmental problems. In this work, a new process was designed to use waste gas (flue gas and flare gas) of a domestic gas refinery to produce pure hydrogen in a membrane reactor. In particular, the process foresees that the energy and CO2 content of flue gas can provide the ...
متن کاملConceptual Design of an Autonomous Once-through Gas-to- Liquid Process with Microchannel Fischer-Tropsch Reactors
Converting remote natural gas to liquid fuel is one possible solution to the problem of transporting remote gas to the energy market. However, the high investment cost of gas-to-liquid (GTL) plants prevents large scale exploitation of remote gas reserves. A lean GTL is suggested based on an autothermal reformer with enriched air as oxidant and a once-through Fischer-Tropsch synthesis. In order ...
متن کاملHighly Efficient Methane Reforming over a Low-loading Ru/γ-Al2O3 Catalyst in a Pd-Ag Membrane Reactor
ratios. In this study, an ultra-low loading (0.15 wt%) Ru/γ-Al2O3 catalyst was implemented in a lab-scale membrane reformer, using a supported 5μm Pd-Ag film membrane. Methane conversions above 90% were achieved at 650 °C, 8 bar, and H2O/CH4 = 2, 3 with contact times of ca. 10 s. The system generated up to 3.5 mol of ultra-pure H2 per mol of CH4 fed, with a maximum power density of 0.9 kW/L. No...
متن کاملSoftware Development for Simulation of Reformer Furnace
In recent years, lots of research has been done on effective usage of natural gas; the first step in these processes is conversion of natural gas to Syngas. Natural gas reforming process by refomer furnace is commonly used for syngas and hydrogen production. In this paper, a windows based software, RIPI-RefSim, is introduced. By using proper heat, mass, kinetic and thermodynamic models as w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017