Design considerations of form birefringent microstructures.

نویسندگان

  • I Richter
  • P C Sun
  • F Xu
  • Y Fainman
چکیده

Diffraction characteristics of high-spatial-frequency (HSF) gratings are evaluated for application to polarization-selective computer-generated holograms by the use of two different approaches: second-order effective-medium theory (EMT) and rigorous coupled-wave analysis (RCWA). The reflectivities and the phase differences for TE- and TM-polarized waves are investigated in terms of various input parameters, and results obtained with second-order EMT and RCWA are compared. It is shown that although the reflection characteristics can be accurately modeled with the second-order EMT, the phase difference created by form birefringence for TE- and TM-polarized waves requires the use of a more rigorous, RCWA approach. The design of HSF gratings in terms of their form birefringence and reflectivity properties is discussed in conjunction with polarization-selective computer-generated holograms. A specific design optimization example furnishes a grating profile that provides a trade-off between the largest form birefrin gence and the lowest reflectivities.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design of two-dimensional polarization-selective diffractive optical elements with form-birefringent microstructures.

We describe a design methodology for synthesizing polarization-sensitive diffractive optical elements based on two-dimensional form-birefringent microstructures. Our technique yields a single binary element capable of producing independent phase transformations for horizontally and vertically polarized illumination. We designed two elements for operation at 10.6 microm and fabricated them in si...

متن کامل

Fabrication, modeling, and characterization of form-birefringent nanostructures.

A 490-nm-deep nanostructure with a period of 200 nm was fabricated in a GaAs substrate by use of electron-beam lithography and dry-etching techniques. The form birefringence of this microstructure was studied numerically with rigorous coupled-wave analysis and compared with experimental measurements at a wavelength of 920 nm. The numerically predicted phase retardation of 163.3± was found to be...

متن کامل

Morphological Control of Polymer Spherulites via Manipulating Radial Lamellar Organization upon Evaporative Crystallization: A Mini Review

Various spherulites or spherulitic crystals are widely encountered in polymeric materials when crystallized from viscous melts or concentrated solutions. However, the microstructures and growth processes are quite complicated and remain unclear and, thus, the formation mechanisms are rather elusive. Here, diverse kinds of spherulitic growths and patterns of typical polyesters via evaporative cr...

متن کامل

Maker fringes revisited: second-harmonic generation from birefringent or absorbing materials

We present a new formulation of Maker fringes in parallel-surface films, using self-consistent boundary conditions for reflections and allowing for any degree of refractive-index dispersion. This treatment of the second-harmonic reflections and dispersion, unlike a number of previous derivations, leads correctly to the expected form for the effective second-harmonic d coefficients. Complete exp...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Applied optics

دوره 34 14  شماره 

صفحات  -

تاریخ انتشار 1995