Numerical Simulation of Earth Pressure Distribution in Head Chamber of Shield Machine with Nonlinear Finite Element Method
نویسنده
چکیده
Model parameters of conditioned soils in head chamber of shield machine are determined based on tri-axial compression tests in laboratory. The loads acting on tunneling face are estimated according to static earth pressure principle. Based on Duncan-Chang nonlinear elastic constitutive model, the earth pressures on head chamber of shield machine are simulated. The variation of earth pressure on different section in head chamber of shield machine is depicted. Relationship between pressure transportation factor and openings rotating cutter-head of shield machine is proposed by using aggression analysis.
منابع مشابه
Break fill-dam simulation using GeoStudio (case study: Safarood earth dam, Kerman)
One of the main reason of earth-dam breaks is inner erosion which is caused by washing fine soil particles and finally lead to seepage inside the dam. Seepage will decrease effective tension in the earth-dam's core and arching phenomena is occurred. More settlement of core than to shell is the consequence of arching and occurrence of cracking. In this paper, GeoStudio software based on finite e...
متن کاملAirflow inside tunnel boring machine: A numerical study and an experimental verification
Knowledge of the airflow distribution inside a Tunnel Boring Machine (TBM) can create a safe working environment for workers and machinery. The airflow quality and the related mass flow rate in the ventilation system should be sufficient to dilute gases and remove dust inside the tunnel. In this work, airflow distribution in the single shield TBM tunnel was studied using computational fluid dyn...
متن کاملNonlinear Finite Element Analysis of Thermoelastic Stresses of FGM Rotating Disk Considering Temperature-Dependency of Material Properties
In the present paper, nonlinear radial and hoop thermoelastic stresses analysis of a disk made of FGMs material is investigated. According to this purpose, finite element method is used. In the present method, second-order one-dimensional element (with three node points) is proposed. The geometrical and stress boundary conditions are defined in the state of non-existence of external pressure an...
متن کاملThree-dimensional numerical simulation of temperature and flow fields in a Czochralski growth of germanium
For a Czochralski growth of Ge crystal, thermal fields have been analysed numerically using the three-dimensional finite volume method (FLUENT package). The arrangement used in a real Czochralski crystal growth lab included a graphite crucible, heat shield, heating device, thermal insulation and chamber including two gas outlets. We have considered two cases for calculations, which are configur...
متن کاملGeometrically nonlinear analysis of axially functionally graded beams by using finite element method
The aim of this paper is to investigate geometrically nonlinear static analysis of axially functionally graded cantilever beam subjected to transversal non follower load. The considered problem is solved by finite element method with total Lagrangian kinematic approach. The material properties of the beam vary along the longitudinal direction according to the power law function. The finite elem...
متن کامل