An ergonomics approach to citrus harvest mechanization.

نویسندگان

  • Simone Emmanuelle Alves Costa
  • João Alberto Camarotto
چکیده

Due to the increase of production costs in manual harvesting, strategies must be developed in order to overcome these effects, such as the attempts in implementing agricultural machines in harvest activities, whether being totally or partially mechanized. This study brings a qualitative and quantitative comparison on the impacts in work conditions and productivity in Brazilian orchards caused by the use of semi-mechanized harvesting systems, such as multiplatforms. The results come from the application of Ergonomic Work Analysis method, which focuses in the activity, quantifying and analyzing times and frequencies of the harvesting cycle, as well as the amount of movements. To achieve this, footage, interviews and a stopwatch were used in the observation 12 pickers' work cycles, six for each method of harvesting. The data interpretation pointed to improvement in working conditions with a reduction in the amount of movements performed by the picker, and increase of up to 60% in productivity with the use of semi-mechanized harvesting. Thus, the found results indicate the viability of this harvesting method. However, other variables must be observed in future studies in order to complete the guidelines for a healthy progress in the area of citrus harvesting in Brazil.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Quality Management of Citrus Fruits an Approach by Critical Success Factors

Citrus is third most important fruit crop in our country after banana and mango, as the demand for the fruits is also increasing tremendously. The magnitude of postharvest losses in Citrus fruits vary from 25 to 30% in India as against 5-10% in developed citrus growing countries like Brazil, USA, Australia, Spain, Italy and Israel. Hence this study is in itself being useful in identification an...

متن کامل

Application of an integrated decision-making approach based on FDAHP and PROMETHEE for selection of optimal coal seam for mechanization; A case study of the Tazareh coal mine complex, Iran

Increasing the production rate and minimizing the related costs, while optimizing the safety measures, are nowadays’ most important tasks in the mining industry. To these ends, mechanization of mines could be applied, which can result in significant cost reductions and higher levels of profitability for underground mines. The potential of a coal mine mechanization depends on some important fact...

متن کامل

Economic and social consequences of agricultural mechanization in rural settlements Case: rural district of South Astarābād in Gorgan County

Introduction Todays, the importance of agricultural development and putting more value on it, unlike past days, is concluded from the fact that in the process of economic development program, an increasing attention is given to social welfare goals in addition to other goals of increasing revenue. In every society, at times of population increase, the increase of agricultural products, which...

متن کامل

Effect of Pre-Harvest Calcium Chloride Spraying on Maintaining Fruit Bioactive Compounds and Antioxidant Capacity of Three Citrus Cultivars during Storage

Bioactive components play an important role in human health. In general, bioactive compounds of fruits decline during storage.  Therefore, maintaining fruits bioactive compounds during storage is very important. In this study, effects of pre-harvest CaCl2 sprays (0, 1, 2, and 4%) at different fruit development stages (120, 140, and 160 days after full bloom) on maintaining fruit quality of thre...

متن کامل

Sugarcane transportation process modeling by time series approach

Sugarcane is one of the severely perishable crops that is used as raw material for white sugar production. Sucrose content of the sugarcane which is of high commercial value decreases in quality due to pre-harvest burning, high ambient temperature, kill-to-mill delays as well as microbial contaminations. Delays in sugarcane transportation are the most important risks which can affect the qualit...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Work

دوره 41 Suppl 1  شماره 

صفحات  -

تاریخ انتشار 2012