Five-parameter grain boundary distribution in grain boundary engineered brass
نویسندگان
چکیده
We report the first application of a five-parameter determination of grain boundary types to grain boundary engineered alpha-brass. The most important findings were that the distribution of planes showed a prevalence of <110> tilt boundaries, especially asymmetric tilt types, and the presence of <111> twist boundaries. This distribution resulted from the low energy of these boundary types.
منابع مشابه
The distribution of misorientations and grain boundary planes in grain boundary engineered brass
In this paper we report the application of a five-parameter determination of grain boundary types to grain boundary engineered alpha-brass. The data are discussed particularly in terms of the distribution of boundary planes, and also with respect to the potential relationship between the planes distribution and the misorientation distribution. Approximately 20,000 grains comprised the total sam...
متن کاملFive-parameter grain boundary distribution of commercially grain boundary engineered nickel and copper
The five-parameter grain boundary distributions of grain boundary engineered nickel and copper specimens have been analyzed in detail. The relative areas of {111} planes in the entire population did not increase as a result of grain boundary engineering (GBE) and, in the R3-excluded population, decreased after GBE. This decrease occurred because the majority of the newly generated R3 grain boun...
متن کاملThe five parameter grain boundary character distribution of polycrystalline silicon
The purpose of this paper is to describe the five-parameter grain boundary character distribution (GBCD) of polycrystalline silicon and compare it to distributions measured in metals and ceramics. The GBCD was determined from the stereological analysis of electron backscatter diffraction maps. The distribution of grain boundary disorientations is non-random and has peaks at 36", 39", 45", 51", ...
متن کاملOrientation Distribution of Σ3 Grain Boundary Planes in Ni Before and After Grain Boundary Engineering
The distribution of grain boundary plane orientations in polycrystalline Ni has been measured before and after grain boundary engineering. The grain boundary engineered microstructure has a relatively higher concentration of Σ3 grain boundaries and, when compared to the initial structure, more of these boundaries have orientations that are inclined by more than 10° from the (111) orientation of...
متن کاملChanges in the five-parameter grain boundary character distribution in a-brass brought about by iterative thermomechanical processing
This paper analyzes the changes in the five-parameter grain boundary character distribution in a-brass brought about by iterative thermomechanical processing (ITMP). In both reference and ITMP specimens, there was a tendency for boundaries to terminate on {111} planes. The high incidence of coherent twins and other boundaries terminated on {111} planes led to a high concentration of asymmetric ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004