Proposal of Carbon Nanotube Inductors

نویسندگان

  • K. Tsubaki
  • Y. Nakajima
  • T. Hanajiri
  • H. Yamaguchi
چکیده

The inductors made of carbon Nanotube (CNT) have been proposed. Though the fabrication of the proposed inductor is still challenging and has many problems, merits of the proposed inductor are following, (i)The magnetic field induced by the current in CNT is about one thousand times larger than that induced by the current in normal copper wire. (ii)The large magnetic field results in the large inductance, according to the relation between magnetic field and inductance. (iii)The inductor made of CNT is smaller than the inductor in IC circuits, because CNT can be bent with small curvature.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electrical applications for novel carbon nanotube morphologies: Does function follow shape?

Nanoscience promises a future of novel devices and technologies that harness the atomic or molecular structure of matter. An intriguing manifestation of this paradigm is in the electrical properties of nonlinear carbon nanotube (CNT) morphologies, such as nanocoils/helices and branched forms, which exploit novel functionality at the nanoscale. For example, in a Y-CNT, the junction region can po...

متن کامل

Effects of Nanotube/Matrix Interface on Multi-Walled Carbon Nanotube Reinforced Polymer Mechanical Properties

In this paper, experimental and Finite Element Methods have been used to determine mechanical properties of nanocomposites. Standard tensile and compression samples with 0.0, 0.15, 0.25, 0.35, 0.45, and 0.55 weight fraction of Multi-Walled Carbon Nanotube (MWCNT) were prepared and tested. Nanotube weight fraction was varied to investigate the effects of nanotube weight fraction on nanocomposite...

متن کامل

Single - Walled 14 . Single - Walled Carbon Nanotube Sensor Concepts

Carbon nanotubes are nanocomponents par excellence that offer unique properties to be exploited in next-generation devices. Sensing applications are perhaps the class that has most to gain from single-walled carbon nanotubes (SWNTs); virtually any property of SWNTs (e.g., electronic, electrical, mechanical, and optical) can result or has already resulted in sensor concept demonstrators. The bas...

متن کامل

Adsorption of Pyrazolone[HPMSP1,Calix[4]-arene, Cu(II) and Cs on Carbon Nanotube

The adsorption of pyrazolone(HPMSP), Calix[4]-arene,Cu and Cs, on carbon nanotube(CNT) atroom temperature has been investigated using spectroscopy.Uv spectroscopy indicated that pyrazolone molecules adsorbed on carbon nanotube at roomtemperature in compared calix[4]- arene molecules adsorbed approximately same.The amount ofpyrazolone(HPMSP) adsorb 3.8. le mol/g and amount calix[4]-arene adsorbe...

متن کامل

Modeling of the adsorption kinetics of Basic Red 46 on single-walled carbon nanotube and carboxylate group functionalized single-walled carbon nanotube

The present study was carried out to investigate the potential of single-walled carbon nanotube (SWCNTs) and carboxylate group functionalized single-walled carbon nanotube (SWCNT-COOH) as alternative adsorbents for the removal of Basic Red 46 (BR 46) from contaminated water by using batch adsorption studies. Effects of some key operating parameters such as pH, ionic strength and contact time on...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007