Development of generic testing strategies for mixed-signal integrated circuits - Circuits, Devices and Systems, IEE Proceedings G
نویسندگان
چکیده
The paper describes work at the Polytechnic of Huddersfield on SERC/DTI research project IED 2/1/2121 conducted in collaboration with GEC-Plessey Semiconductors, Wolfson Microelectronics, and UMIST. The aim of the work is to develop generic testing strategies for mixed-signal (mixed analogue and digital) integrated circuits. The paper proposes a test structure for mixed-signal ICs, and details the development of a test technique and fault model for the analogue circuit cells encountered in these devices. Results obtained during the evaluation of this technique in simulation are presented, and the ECAD facilities that have contributed to this and other such projects are described.
منابع مشابه
Flexible embedded test solution for high-speed analogue front-end architectures - Circuits, Devices and Systems, IEE Proceedings [see also IEE Proceedings G- Circuits, Devices and
A flexible embedded test solution for high-speed analogue front-end subsystems is presented. A novel concept of a flexible test solution that addresses virtual component test requirements in particular is introduced. The integration and application of the non-invasive digital test solution is demonstrated for a representative design. Its area overhead is assessed for different depths in on-chip...
متن کاملEnergy-efficient self-timed circuit design using supply voltage scaling - Circuits, Devices and Systems, IEE Proceedings [see also IEE Proceedings G- Circuits, Devices and
Abstract: Energy-efficient design for self-timed circuits is investigated. Null convention logic is employed to construct speed-independent self-timed circuits. For error-free computation, the supply voltage automatically tracks the input data rate so that the supply voltage can be kept as small as possible while maintaining the speed requirement. For error-tolerable computation, such as soft d...
متن کاملModeling and Simulation of Substrate Noise in Mixed-Signal Circuits Applied to a Special VCO
The mixed-signal circuits with both analog and digital blocks on a single chip have wide applications in communication and RF circuits. Integrating these two blocks can cause serious problems especially in applications requiring fast digital circuits and high performance analog blocks. Fast switching in digital blocks generates a noise which can be introduced to analog circuits by the common su...
متن کاملA MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کاملDsp Based Testing Of Analog And Mixed Signal Circuits
analog circuit testing university of cincinnati dsp based testing of analog and mixed signal circuits dsp based analog and mixed signal test ernet india dsp based testing of analog and mixed signal circuits dsp based testing of analog and mixed signal circuits dsp based testing of analog and mixed signal circuits mixed signal and dsp design techniques analog devices dsp-based analog and mixed-s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2004