Asymptotic analysis of the potential energy difference because of a crack at a V-notch edge in a 3D domain
نویسندگان
چکیده
The difference in the potential energy in an elastic three-dimensional domain with a V-notch with and without a small crack ( δΠ ) under a general mixed mode I+II+III loading is provided as an asymptotic series. It involves the V-notch edge stress intensity functions, the area of the formed crack, and special geometrical functions that can be pre-computed and tabulated. Importantly, the stress intensity functions along the crack front and the solution for the V-notched domain with the presence of the crack are un-necessary. The analytical formulation is verified by finite element methods, demonstrating the accuracy of the obtained expressions.
منابع مشابه
A 3-D Failure Initiation Criterion from a Sharp V-notch Edge in Elastic Brittle Structures
A three-dimensional failure initiation criterion in brittle materials containing a sharp V-notch is presented and validated by experiments. It is based on simultaneous fulfilment of the stress requirement and a finite fracture mechanics energy release rate (ERR) requirement. Since the ERR cannot determine failure initiation direction for dominant mode III loading, the failure initiation orienta...
متن کاملCrack Interaction Studies Using XFEM Technique
In this paper, edge crack problems under mechanical loads have been analysed using extended finite element method (XFEM) as it has proved to be a competent method for handling problems with discontinuities. The XFEM provides a versatile technique to model discontinuities in the solution domain without re-meshing or conformal mesh. The stress intensity factors (SIF) have been calculated by domai...
متن کاملانرژی ضربه فولادهای مرتبهای در حالت توقفگر ترک
Charpy impact energy of functionally graded steels in the form of crack arrester configuration was investigated. Functionally graded steels which contain layers of ferrite, austenite, bainite and/or martensite could be produced by electroslag remelting. The results showed that notch tip position and the distances of notch with respect to the bainite and martensite layers significantly affect th...
متن کاملStress Field Analysis of V-Notches with Tip Cracks in a Polymer Material Using Digital Image Correlation
In this study, displacement field around v-notches of a poly methyl metha crylate (PMMA) specimen with tip cracks will be analyzed using digital image correlation technique. First intensity factor in combination with in-plane rigid body translations and rotation components will be determined by linear least squares fitting of the displacement field data to the corresponding relations among stre...
متن کاملStress intensity factor at the hole-edge cracks tips in a finite plate
In the current research work, the problem of fracture mechanics in a plate with a central hole under tensile loading is studied. The stress intensity factors are calculated for a finite plate containing two symmetrical hole-edge cracks. The problem is solved by two different methods, namely the finite element method and the FRANC software analysis. At first the finite element method is used and...
متن کامل