Characteristics of Carbon Material Formation on SBA-15 and Ni-SBA-15 Templates by Acetylene Decomposition and Their Bioactivity Effects

Carbon spheres and tubes were formed from acetylene decomposition on SBA-15 and Ni-SBA-15 at 650-850 °C. At 650 °C, the decomposed carbons covered the surface of the support, and no carbon spheres and filament materials were formed. Carbon sphere formation occurred at 750 °C-850 °C; with diameters ranging from 0.8 μm-1.1 μm. For Ni-SBA-15, the diameters of the spheres and filaments were 0.8 μm and 62 nm, respectively, at 650 °C. At 750 °C, the diameter of the ball carbon materials ranged from 0.7 μm-0.8 μm, the diameter of the carbon tubes formed was 120-130 nm, and their pore diameter was 8.0 nm-11 nm. At 850 °C, the diameters of ball carbon materials and carbon tubes were similar to those of the materials at the formation temperature, 750 °C. Si, O and C were the main constituents of SBA-15; Ni-SBA-15 and carbon material formation supports. High-ring PAHs (such as BaP (five rings); IND (six rings); DBA (five rings) and B[ghi]P (six rings)) exist in carbon materials. SBA-15 revealed insignificant cytotoxicity, but Ni-SBA-15 inhibited the proliferation of human lung cancer cells (A549). Less inhibition on cell viability and reactive oxidative species (ROS) generation on A549 were determined for carbon material formation on the Ni-SBA-15 compared to the Ni-SBA-15.