Granular flow through an aperture: pressure and flow rate are independent.
نویسندگان
چکیده
We simultaneously measure the flow rate and the normal force on the base, near the outlet, during the discharge through an orifice of a dense packing of monosized disks driven by a conveyor belt. We find that the normal force on the base decreases even when a constant flow rate is measured. In addition, we show, by changing the mass of the disks, that pressure can be changed while the flow rate remains constant. Conversely, we are able, by changing the belt velocity, to set different flow rates for the same pressure. The experiment confirms that, contrary to what has been implicitly assumed in numerous works, the flow rate through an aperture is not controlled by the pressure in the outlet region.
منابع مشابه
Granular flow through an aperture: influence of the packing fraction.
For the last 50 years, the flow of a granular material through an aperture has been intensely studied in gravity-driven vertical systems (e.g., silos and hoppers). Nevertheless, in many industrial applications, grains are horizontally transported at constant velocity, lying on conveyor belts or floating on the surface of flowing liquids. Unlike fluid flows, that are controlled by the pressure, ...
متن کاملInfluence of an external magnetic field on the peristaltic flow of a couple stress fluid through a porous medium.
Magnetohydrodynamic(MHD) peristaltic flow of a Couple Stress Fluid through a permeable channel is examined in this investigation. The flow analysis is performed in the presence of an External Magnetic Field. Long wavelength and low Reynolds number approach is implemented. Mathematical expressions of axial velocity, pressure gradient and volume flow rate are obtained. Pressure rise, frictional f...
متن کاملIntegrated Analysis of Choke Performance and Flow Behaviour in High-Rate, Deviated Gas-Condensate Wells
 Understanding the flow behaviour in a gas well is crucial for future production strategies, obtaining bottomhole conditions from wellhead production data, analyzing production data and estimating reservoir properties. In this work, the pressure profile and flow regime are studied on four wells of a multi-well, multi-layer gas-condensate reservoir, producing at high rate. The wells are deviate...
متن کاملEffect of Blade Design Parameters on Air Flow through an Axial Fan
The objective of this paper is the numerical study of the flow through an axial fan and examining the effects of blade design parameters on the performance of the fan. The axial fan is extensively used for cooling of the electronic devices and servers. Simulation of the three-dimensional incompressible turbulent flow was conducted by numerical solution of the (RANS) equations for a model. The S...
متن کاملCFD Modeling of the Feed Distribution System of a Gas-Solid Reactor
Granular flow simulation using CFD has received a lot of attention in recent years. In such cases, CFD is either, coupled with Discrete Element Method (DEM) techniques for appropriate incorporation of inter-particle collisions, or the Eulerian CFD approach is used in which granular particles are treated as they were fluid. In the present study, a CFD analysis was performed...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Physical review. E, Statistical, nonlinear, and soft matter physics
دوره 83 6 Pt 1 شماره
صفحات -
تاریخ انتشار 2011