Biomass of Mucor Heimalis for the Biosorption of Cadmium from Aqueous Solutions: Equilibrium and Kinetic Studies

The present study deals with the utilization of a cellulosic material, i.e. fungal biomass of Mucor heimalis, for the removal of cadmium from aqueous solution in a batch system. Effects of various parameters such as pH, biomass dosage, contact time, and initial metal concentrations were investigated. The sorption of cadmium followed pseudo-secondorder rate kinetics (R=0.998). Intraparticle diffusion was found not to be the sole rate-controlling step. Thermodynamic studies revealed that the sorption of cadmium was feasible, spontaneous, and exothermic. Various isotherm models viz. Langmuir, Freundlich, Redlich–Peterson, Dubinin-Radushkevich, and Temkin isotherms were applied. The Langmuir and Redlich–Peterson models were found to be in good agreement with experimental data with high R, low RMSE, and low χ values. The Redlich–Peterson isotherm constant g was found to be unity, which implies a good fit to the Langmuir model. The maximum sorption capacity calculated from the Langmuir isotherm was 85.47 mg/g at optimum conditions of pH 6.0, contact time of 35 min, biomass dosage of 1g/L, and temperature of 25 C.