Wire-Frame Method for Blending Surface Design
نویسنده
چکیده
This paper introduces a wire-frame method for the generation of blending surfaces. It is a numerical approach to the design of surfaces that smoothly join two or more given surfaces. The blending surface generated by the wire-frame method is composed of a set of bicubic patches in parametric forms. The wire-frame method first constructs a set of wire-frames. Each element of the wire-frame is modeled as an elastic beam subject to external load. The stiffness of the beam and the distribution of the load are used to control the shape of the blending surfaces. The shape of the wire-frames can then be computed from the deflection of the beams. After the wire-frame is constructed, a set of bicubic patch can then be computed from the interpolating polynomials using the tensor product rule.
منابع مشابه
Optimisation of wire-cut EDM process parameter by Grey-based response surface methodology
Wire electric discharge machining (WEDM) is one of the advanced machining processes. Response surface methodology coupled with Grey relation analysis method has been proposed and used to optimise the machining parameters of WEDM. A face centred cubic design is used for conducting experiments on high speed steel (HSS) M2 grade workpiece material. The regression model of significant factors such ...
متن کاملExperimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کامل3-D Modeling from a Single Sketch Image Using Genetic Algorithms
This article presents a method for constructing a surface model automatically from a single sketch image. The sketch image must be drawn on a paper based on some rules of industrial design. First, the sketch image is digitized by a scanner and a contour image is found by preprocessing. 2-D corners are detected from the contour image and 3-D coordinates of each corner are inferred as vertices of...
متن کاملSolid reconstruction using recognition of quadric surfaces from orthographic views
The reconstruction of 3D objects from 2D orthographic views is crucial for maintaining and further developing existing product designs. A B-rep oriented method for reconstructing curved objects from three orthographic views is presented by employing a hybrid wire-frame in place of an intermediate wire-frame. The Link-Relation Graph (LRG) is introduced as a multi-graph representation of orthogra...
متن کاملIntelligent Knowledge Based System Approach for Optimization of Design and Manufacturing Process for Wire-Electrical Discharge Machining
Wire electrical discharge machining (WEDM) is a method to cut conductive materials with a thin electrode that follows a programmed path. The electrode is a thin wire. Typical diameters range from .004" - .012" (.10mm - .30mm) although smaller and larger diameters are available. WEDM is a thermal machining process capable of accurately machining parts with varying hardness or complex shapes. WED...
متن کامل