A discrete analysis of metal-v belt drive
نویسندگان
چکیده
The metal-V belt drive includes a large number of parts which interact between them to transmit power from the input to the output pulleys. A compression belt composed of a great number of struts is maintained by a tension flat belt. Power is them shared into the two belts that moves generally in opposite directions. Due to the particular geometry of the elements and to the great number of parts, a numerical approach achieves the global equilibrium of the mechanism from the elementary part equilibrium. Sliding arc on each pulley can be thus defined both for the compression and tension belts. Finally, power sharing can be calculated as differential motion between the belts, is defined. The first part of the paper will present the different steps of the quasi-static mechanical analysis and their numerical implementations. Load distributions, speed profiles and sliding angle values will be discussed. The second part of the paper will deal to a systematic use of the computer software. Speed ratio, transmitted torque, strut geometry and friction coefficients effect will be analysed with the output parameter variations. Finally, the effect pulley deformable flanges will be discussed.
منابع مشابه
Transmission Efficiency Prediction of a Metal Pushing V-belt CVT with Implementation of Control Logic
Abstract: A simulation technology has been developed to predict the transmission efficiency of a metal pushing V-belt and pulleys that make up the drive system of a continuously variable transmission (CVT). When a CVT operates in an actual vehicle, pulley thrust pressure is adjusted by feedback control to maintain a speed ratio. This feedback control has been implemented, for the first time, in...
متن کاملDYNAMICAL ANALYSIS AND DESIGN OF FRONT ENGINE ACCESSORY DRIVE SYSTEM
In this paper, Front Engine Accessory Drive (FEAD) system of automotive engine is modeled with ADAMS software. The model is validated using engine test data. It is then used to investigate the effect of design parameters on the system performance such as belt vibration and loads on the idlers. Three alternative layouts were developed in order to improve the performance of original EEAD system. ...
متن کاملA Simple Approach to Static Analysis of Tall Buildings with a Combined Tube-in-tube and Outrigger-belt Truss System Subjected to Lateral Loading
In this paper, an efficient technique is presented for static analysis of tall buildings with combined tube-in-tube and outrigger-belt truss system while considering shear lag effects. In the process of replacing the discrete structure with an elastically equivalent continuous one, the structure is modeled as two parallel cantilevered flexural-shear beams that are constrained at the outrigger-b...
متن کاملFinite Element Analysis Coupled with Feedback Control for Dynamics of Metal Pushing V-Belt CVT
متن کامل
Validation of a Flexible Multibody Belt-Drive Model
In the past decade the applicability of belt-drives has been extended significantly due to their increased reliability. With automotive engines it is now common to join a large number of belt-drives into a single, long belt-drive with several tensioner pulleys. However, these belt-drives can exhibit complex dynamic behaviors; therefore it is very important to predict the dynamics response of su...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- CoRR
دوره abs/1301.5595 شماره
صفحات -
تاریخ انتشار 2013