Interphase Composition Profile in SB/SBS Block Copolymers, Measured with Electron Microscopy, and Microstructural Implications

نویسندگان

  • Daniel W. Hone
  • Richard J. Spontak
چکیده

The behavior of microphase-separated block copolymers has major contributions from the mixed interphase existing between the two homogeneous phases. However, relatively little has been known about the interphase itself and, in particular, its composition profile has never been measured directly. Here, we have used quantitative transmission electron microscopy to acquire the shape of the volume-fraction composition profile across this interphase. Measurements were made on four styrene (S)/butadiene (B) block copolymers having structure SBS (three) and SB (one), with molecular weights 1.0-2.3 X lo5 g/mol and overall volume compositions of 0.24-0.38 styrene. Results, averaged over the four samples, depict an asymmetric interphase profile, being rich in styrene (54 vol %) in agreement with new differential scanning calorimetry data and with dynamic mechanical testing studies of others. This profile is then used in an equilibrium thermodynamic theory (which extends earlier work by adding an enthalpic "Debye" term that accounts for molecular interactions beyond nearest neighbors) to predict various microstructural and thermal properties of the bulk polymer. Excellent agreement with reported data is obtained for the predicted interphase thickness and interphase volume fraction and for predictions of the repeat distance for lamellar SB copolymers. Introduction and molecular architecture. The result of this microphase separation is the formation of either a cocontinuous comseparation *der conditions encountered posite of lamellar elements or a dispersed phase of domains in pradice) of composition, distributed in a continuous matrix (Figure 1). Since these microphase-separated block copolymers exhibit thermal and mechanical properties unlike those of either homopolymer or a random copolymer of similar composition, Block copolymers are known to undergo microphase weight, temperature, *To whom correspondence should be addressed. 0024-9297/88/2221-1377$01.50/0

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of different mass ratio of PLA: PEG segments in PLA-PEG-PLA copolymers on the physicochemical characterization and DNA release profile

Background: Adapting controlled release technologies to the delivery of DNA has the great potential to overcome extracellular barriers that limit gene delivery. This study investigates the effect of different mass ratio of PLA: PEG in the various tri block poly (lactic acid)-poly (ethylene glycol) - Poly (lactic acid) copolymer (PLA-PEG-PLA) on the properties of the resulting nanoparticles. Me...

متن کامل

Compatibilization of polycarbonate/poly (ethylene terephthalate) blends by addition of their transesterification product

In this study, poly carbonate (PC) and poly (ethylene terephthalate) (PET) were reactive melt-blended under two different conditions to produce PC/PET copolymers. For each condition, samples were taken at specified mixing times representative a specific structure of copolymers and each one employed to physically compatibilize a PC/PET blend with a fixed composition. Reactive blending and copoly...

متن کامل

C-CfTXA-STxB chimeric antigen loading in PLA-PEG-PLA tri-block copolymers and its immunization in mice

Introduction: The venom of Jellyfish venom contains a variety of bioactive proteins that can be studied for vaccine application. Poly-Lactic Acid is a biodegradable polymer that is used in vaccine systems. The aim of this study was to encapsulate the C-CfTX1-STxB protein into PLA-PEG-PLA three-block copolymer and its immunogenicity study in mice. Materials and Methods: After purification, the p...

متن کامل

Effects of Various Chairside Surface Treatments on Zirconia-Resin Cement Bond Strength

Introduction: Various surface treatments have been used to improve the adhesion of resin cement to zirconia restorations. The present study aimed to investigate the effects of different surface treatments on the bond strength of resin cement to zirconia (Y-TZP) in clinical practice. Methods: thirty square Y-TZP samples were classified into three groups of 10, including group SB (50 µm sandblast...

متن کامل

Dissecting the Mechanism of Martensitic Transformation via Atomic-Scale Observations

Martensitic transformation plays a pivotal role in the microstructural evolution and plasticity of many engineering materials. However, so far the underlying atomic processes that accomplish the displacive transformation have been obscured by the difficulty in directly observing key microstructural signatures on atomic scale. To resolve this long-standing problem, here we examine an AISI 304 au...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2001