Thermal Considerations of QFN and Other Exposed-Paddle Packages
ثبت نشده
چکیده
Note: This application note is a summary and compilation of information based on the references mentioned at the end of this document. This information is neither tested nor guaranteed by Maxim Integrated Products. Individuals should examine the published references for details about the source and test procedures used to obtain this information.
منابع مشابه
AND8432 - Thermal Considerations for a 4x4 mm QFN
Overview The 4x4 QFN package is becoming popular for many signal and interface applications. To enable optimal thermal performance, this package has an exposed heatsink designed to be soldered directly to a metal pad on the application board. The purpose of this article is to show how application board thermal properties dominate the typical system in which a small QFN package might be used. Th...
متن کاملTHE EFFECT OF DELAMINATION BETWEEN MOLD COMPOUND AND Ni/Pd/Au LEADFRAME ON QFN PACKAGE
The susceptibility of QFN package to delamination, particularly in the area between the Ni/Pd/Au leadframe die pad and mold compound, has been a major concern to many IC manufacturers. The presence of a Ni/Pd/Au oxide layer on the leadframe of QFN packages was found to cause delamination at the die pad or mold compound interface. Delamination refers to the disbonding between a surface of the mo...
متن کاملSolder Joint Reliability Analysis and Testing
QFN packages have become mainstream designs for mobile applications. As more applications adopt the QFN style packages, I/O count requirements are increasing. The typical method for increasing pin count in a QFN package is to increase the body size to accommodate the additional lead fingers. This is undesirable though, as mobile device users are pushing for smaller package sizes. By using a dua...
متن کاملInvestigation of Warpage Induced on Molded Strip of Qfn Package
Warpage is known to be one of the primary molding issues during assembly of QFN package. It affects the package sawing process, and cause reliability issues. The main cause of warpage of area array packages is the coefficient thermal expansion (CTE) mismatch between the moulding compound and other components inside the package. The objective of this study is to investigate the warpage induced o...
متن کاملStress Analysis of Hygrothermal Delamination of Quad Flat No-lead (QFN) Packages
Interfacial delamination is the major reliability issue of Quad Flat No-lead (QFN) packages under the JEDEC-MSL preconditioning and reflow process. Failures will occur when the hygrothermal stress exceeds the interfacial strength. Simulation based on finite element model is a popular method for studying the failure mechanism. However, the non-accurate material properties and lack of experiment ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008