Spatial Distributions of Hole Traps, and Image Latency in InSb Focal Plane Arrays
نویسندگان
چکیده
Spatial distributions of hole trap sites on a quasipixel level in InSb arrays for SIRTF are examined. The dependence of ux, uence, and applied bias on image latency is investigated, and experimental results are presented and discussed. Models of linearity and capacitance are compared with experimental results. We nd increasing the depletion width in a light exposed pixel by larger reverse biasing decreases the trapped charge (or latency) in that pixel by factors of 3. Assumed pixel geometries lead to an apparent spatial density of active trap sites that falls quickly with distance from the implants.
منابع مشابه
Finite Element Analysis on Structural Stress of 32x32 InSb Focal Plane Arrays Integrated with Microlens Arrays
Basing on the temperature dependent elastic model of underfill and the Anand’s viscoplastic model of indium bumps, A three-dimension finite element model is developed to simulate the structural stress and its distribution in 32×32 InSb infrared focal plane arrays integrated with microlens arrays. To learn the stress and its distribution for large format array in a short time, a small 8×8 InSb I...
متن کاملAnalysis of Structural Stress in InSb Array Detector without Underfill
Hybrid infrared focal plane arrays (IRFPAs) are more and more used in both infrared medium and long wavebands for many different applications. In order to offer more spatial resolution, larger format (2048×2048) start to be available, yet its final yield is so low that its cost is very high, and is not affordable. In this paper, basing on viscoplastic Anand’s model, the structural stress of ind...
متن کاملDependence of the Deformation of 128 128 InSb Focal-plane Arrays on the Silicon Readout Integrated Circuit Thickness
The square checkerboard buckling deformation appearing in indium antimonide infrared focal-plane arrays (InSb IRFPAs) subjected to the thermal shock tests, results in the fracturing of the InSb chip, which restricts its final yield. In light of the proposed three-dimensional modeling, we proposed the method of thinning a silicon readout integrated circuit (ROIC) to level the uneven top surface ...
متن کاملDeformation Analysis of 128×128 Infrared Detector with Reticulated InSb Pixel Array
The reticulated InSb pixel array was successfully employed in the design of large format InSb infrared focal plane arrays (IRFPAs) detector, to remove the thermal strain accumulated in InSb IRFPAs with the thermal shock test. In order to explore the deformation rules in the InSb IRFPAs with reticulated InSb pixel array, in light of the proposed equivalent modeling, a three-dimensional modeling ...
متن کاملRESOLUTION PERFORMANCE IMPROVEMENTS IN STARING IMAGING SYSTEMS USING MICRO - SCANNING AND A RETICULATED , SELECTABLE FILL FACTOR InSb FPA
As staring focal plane array (FPA) detectors continue to mature, FPA based IR imaging systems are available in more compact packages that are lighter and consume less power than first or second generation scanning IR sensor packages. However, standard IR analysis models indicate that staring FPA based cameras, while having excellent sensitivity, will have reduced resolution when compared to sca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2000