Transparent Interconnection of Lots of Links (TRILL): Fault Management

نویسندگان

  • Tissa Senevirathne
  • Norman Finn
  • Samer Salam
  • Deepak Kumar
  • Donald E. Eastlake
  • Sam Aldrin
  • Yizhou Li
چکیده

This document specifies Transparent Interconnection of Lots of Links (TRILL) Operations, Administration, and Maintenance (OAM) fault management. Methods in this document follow the CFM (Connectivity Fault Management) framework defined in IEEE 802.1 and reuse OAM tools where possible. Additional messages and TLVs are defined for TRILLspecific applications or for cases where a different set of information is required other than CFM as defined in IEEE 802.1. This document updates RFC 6325.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Internet Engineering Task Force (ietf) Problem Statement and Goals for Active-active Connection at the Transparent Interconnection of Lots of Links (trill) Edge

The IETF TRILL (Transparent Interconnection of Lots of Links) protocol provides support for flow-level multipathing with rapid failover for both unicast and multi-destination traffic in networks with arbitrary topology. Active-active connection at the TRILL edge is the extension of these characteristics to end stations that are multiply connected to a TRILL campus. This informational document d...

متن کامل

Transparent Interconnection of Lots of Links (TRILL): Fine-Grained Labeling

The IETF has standardized Transparent Interconnection of Lots of Links (TRILL), a protocol for least-cost transparent frame routing in multi-hop networks with arbitrary topologies and link technologies, using link-state routing and a hop count. The TRILL base protocol standard supports the labeling of TRILL Data packets with up to 4K IDs. However, there are applications that require a larger nu...

متن کامل

Problem Statement and Goals for Active-Active Connection at the Transparent Interconnection of Lots of Links (TRILL) Edge

The IETF TRILL (Transparent Interconnection of Lots of Links) protocol provides support for flow-level multipathing with rapid failover for both unicast and multi-destination traffic in networks with arbitrary topology. Active-active connection at the TRILL edge is the extension of these characteristics to end stations that are multiply connected to a TRILL campus. This informational document d...

متن کامل

Transparent Interconnection of Lots of Links (TRILL): Adjacency

The IETF Transparent Interconnection of Lots of Links (TRILL) protocol supports arbitrary link technologies between TRILL switches, including point-to-point links and multi-access Local Area Network (LAN) links that can have multiple TRILL switches and end stations attached. TRILL uses Intermediate System to Intermediate System (IS-IS) routing. This document specifies the establishment, reporti...

متن کامل

Transparent Interconnection of Lots of Links (TRILL): End Station Address Distribution Information (ESADI) Protocol

The IETF TRILL (Transparent Interconnection of Lots of Links) protocol provides least-cost pair-wise data forwarding without configuration in multi-hop networks with arbitrary topologies and link technologies. TRILL supports multipathing of both unicast and multicast traffic. Devices that implement the TRILL protocol are called TRILL switches or RBridges (Routing Bridges). ESADI (End Station Ad...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • RFC

دوره 7455  شماره 

صفحات  -

تاریخ انتشار 2015