A Monolithic CMOS Microhotplate-Based Gas Sensor System

A monolithic CMOS microhotplate-based conductance-type gas sensor system is described. A bulk micromachining technique is used to create suspended microhotplate structures that serve as sensing film platforms. The thermal properties of the microhotplates include a 1-ms thermal time constant and a 10 C mW thermal efficiency. The polysilicon used for the microhotplate heater exhibits a temperature coefficient of resistance of 1.067 10 3 C. Tin(IV) oxide and titanium(IV) oxide (SnO2 TiO2) sensing films are grown over postpatterned gold sensing electrodes on the microhotplate using low-pressure chemical vapor deposition (LPCVD). An array of microhotplate gas sensors with different sensing film properties is fabricated by using a different temperature for each microhotplate during the LPCVD film growth process. Interface circuits are designed and implemented monolithically with the array of microhotplate gas sensors. Bipolar transistors are found to be a good choice for the heater drivers, and MOSFET switches are suitable for addressing the sensing films. An on-chip operational amplifier improves the signal-to-noise ratio and produces a robust output signal. Isothermal responses demonstrate the ability of the sensors to detect different gas molecules over a wide range of concentrations including detection below 100 nanomoles/mole.