Flow injection Techniques of Method Development for Flame Atomic-a bsorption Spectrometry
نویسنده
چکیده
The flow injection introduction of samples that would be difficult by conventional nebulisation owing to dissolved solid content, viscosity or quenching effects on flame reactions is demonstrated. The various ways of achieving sample dilution by control of volume injected, tube dimensions and flow-rate are discussed and a manifold described for producing solutions for calibration purposes and diluting off-range samples. The important characteristics of the nebuliser and instrument for flow injection work are evaluated. A simple manifold for investigating interference effects is described and its use illustrated for some well known effects. The possibilities of achieving pre-treatment by solvent extraction and extension to include indirect methods are discussed and the role of flow injection procedures in the method development for, and the extension of the range of application of, flame atomic-absorption spectrometry is critically evaluated.
منابع مشابه
Application of Sulfur Nanoparticles as a Solid Phase Extraction Sorbent for the Preconcentration of Lead(II) and Palladium(II) in Environmental Samples Prior to Flame Atomic Absorption Spectrometry Determination
The application of sulfur nanoparticles as an efficient adsorbent for the solid-phase extraction and determination of the trace amounts of Pb and Pd ions was investigated in environmental samples using flame atomic absorption spectrometry. Effects of various parameters such as pH, flow rate of sample and eluent, type and concentration of eluent, sample volume, amount of adsorbent and interferin...
متن کاملDevelopment of ultrasound-assisted emulsification microextraction for the determination of trace zinc and copper by flame atomic absorption spectrometry
In this work, we developed a method based on ultrasound-assisted emulsification microextraction (USAEME) for the determination of zinc and copper by flame atomic absorption spectrometry (FAAS). The method is based on the use of the organic solvent carbon tetrachloride (CCl4) as an extraction solvent. In order to obtain a high enrichment factor, the effect of different parameters affecting the c...
متن کاملComparison of Modified Palladium Nanoparticles and Homemade Activated Carbon Derived from Medlar for Solid Phase Extraction of Metal Ions Prior to Their Flame Atomic Absorption Spectrometry Determination
This study focus on the preparation of two supports including activated carbon derived from medlar and Palladium nanoparticles loaded on activated carbon (Pd-NP-AC). Subsequently, both adsorbent modified with a novel Schiff base chelating agent and their potential applicability for determination of trace amounts of metal ions from aqueous solution has been investigated. The method is based on c...
متن کاملEvaluation of two different extraction techniques on determination of 〖Pb〗^(+2) contents of wastes of dye manufacturing industries
Extraction of trace amounts of toxic heavy metals from complicated environmental matrixes is a challenging task. The aim of this investigation is the comparison of the extraction efficiencies and other related experimental variables ( chemicals, effect of pH, potential interfering ions) on the determination of inorganic lead ( ) which is present in waste water of dye industries. Compared techn...
متن کاملDispersive liquid–liquid microextraction based on solidification of floating organic drop combined with flame atomic absorption spectrometry for determination trace amount of cobalt in water samples
An efficient, rapid, simple, and highly selective dispersive liquid–liquid microextraction basedon solidification of floating organic drop (DLLME-SFOD), combined with flame atomicabsorption spectrometry was developed for preconcentration and determination of trace amountsof cobalt in water samples. In this method, an appropriate mixture of acetone and1-undecanol was injected rapidly into the aq...
متن کامل