Modeling the Dynamic Behaviour of the Wheel Rail Interface Using a Novel 3d Wheel-rail Contact Model
نویسندگان
چکیده
Methods for multibody modelling and simulation should accurately replicate the dynamic behaviour of rail-wheel interface including precise values for wheel-rail contact positions. This paper studies the development of a novel 3-D wheel-rail contact model which is used for dynamic simulation of a suspended wheelset with parameters listed for a typical Mark IV coach. The contact point locations on the wheel and rail are determined by the minimum difference method considering the lateral displacement, yaw angle and the roll angle. The proposed new 3D wheel-rail contact model can be applied in railway condition monitoring techniques to estimate the wheel geometry parameters and thus to achieve practical optimised wheel-rail interfaces.
منابع مشابه
Preliminary results on multi-body dynamic simulation of a new test rig for wheel-rail contact
The ability to perform rolling contact fatigue (RCF) experiments in wheel–rail material is provided by a new small–scale test rig, manifesting the actual dynamic behaviour of the railway system. In this paper, a multi-body dynamics (MBD) model is proposed, simulating the vibration behaviour of the prescribed rig. The new testing facility is modelled using a three-dimensional model of the vehicl...
متن کاملAnalytical Approach to Vibration Analysis Of the Wheel-rail contact
Wheel/rail contact simulation is one of the most complicated problems in the modeling of railway vehicles. The wheel/rail interaction plays a unique role in rail vehicle dynamics. In this paper, the dynamic response of the wheel on irregular rail track is analyzed with analytical approach using the method of Multiple Scales (MMS). The Hertzian contact theory is used to obtain the relationshi...
متن کاملPreliminary results on dynamic analysis of a new test rig for wheel-rail contact studies
A new reduced–scale test rig is developed owing to significantly contribute to the applicability of the laboratory tests on rolling contact fatigue (RCF) in wheel-rail material. This paper introduces the dynamic analysis of the test rig, in order to assess the vibration behaviour of the system with respect to contact phenomenon. Finite element modelling (FEM) is used to simulate the mecha...
متن کاملDynamic Response of the Coupled Vehicle-Floating Slab Track System using Finite Element Method
In present study, a mathematical model of the vehicle–floating slab track (FST) interaction is established to investigate the coupled behaviour of vehicle–track system. The FST is modelled as the double Euler -Bernoulli beam including the rail and slab. The railway vehicle is simplified as a multi-rigid-body model. The wheel–rail interface is treated using a nonlinear Hertzian contact model, co...
متن کاملAnalysis of wheel and rail Hertzian and Non-Hertzian contact theories using UM software considering the effect of rail inclination on wheel wear
Wheel-rail interaction has always been one of the issues in the railway industry. In this paper, the effect of Hertzian and non-Hertzian contact theories on the wheel wear due to the rail inclination was investigated. by using the UM software. According to the results, longer contact areas are obtained in non- Hertzian contact theory compared to Hertzian contact theory. In non-Hertzian contact...
متن کامل