Laser Melting of thin wall parts using pulse shaping
نویسنده
چکیده
Pulse shaping is a techniqueused to temporally distribute energywithin a single laser pulse. This provides the user an added degree of control over the heat delivered to the laser material interaction zone. Pulses that induce a gradual heating or a prolonged cooling effect can be generated with peak power/pulse
منابع مشابه
Manufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method
Recently friction stir welding for manufacturing of welded tubes has been developed. Friction stir welding is a continuous solid state welding process in which a non-consumable rotating tool using severe plastic deformation Can join materials can be join materials. Commonly, a portion of a specially shaped rotating tool is plunged between metalsjoint cross section and adjacent faces of the join...
متن کاملManufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method
Recently friction stir welding for manufacturing of welded tubes has been developed. Friction stir welding is a continuous solid state welding process in which a non-consumable rotating tool using severe plastic deformation Can join materials can be join materials. Commonly, a portion of a specially shaped rotating tool is plunged between metalsjoint cross section and adjacent faces of the join...
متن کاملEffect of pressure relaxation on the mechanisms of short-pulse laser melting.
The kinetics and microscopic mechanisms of laser melting of a thin metal film are investigated in a computational study that combines molecular dynamics simulations with a continuum description of the laser excitation and subsequent relaxation of the conduction band electrons. Two competing melting mechanisms, homogeneous nucleation of liquid regions inside the crystalline material and propagat...
متن کامللیزر Ce:Nd:YAG با دمش دیود نورگسیل و سوییچ Q انفعالی
The experimental study of passively Q-switched, LED-pumped Ce:Nd:YAG laser is reported. The active medium is a 3 mm diameter laser rod with 60 mm length; it is optically pumped with four segments of blue LEDs at 460 nm, with each segment consisting of 32 single LEDs. The 14 cm length optical resonator with 2 dielectric mirrors and the reflectivity of 99 and 93 percent at 1064 nm produced more t...
متن کاملPulsed Laser Porosification of Silicon Thin Films
We present a new and simple laser-based process to porosify thin film silicon using a pulsed laser. During deposition, we incorporate gas atoms or molecules into the Si thin film. Pulsed laser radiation of wavelength λ = 532 nm heats up thin film Si beyond its melting point. Upon heating, gas atoms or molecules form nm-sized thermally expanding gas bubbles in the silicon melt, until they explos...
متن کامل