Estimation and identification of parameters in a lumped cerebrovascular model.

نویسندگان

  • Scott R Pope
  • Laura M Ellwein
  • Cheryl L Zapata
  • Vera Novak
  • C T Kelley
  • Mette S Olufsen
چکیده

This study shows how sensitivity analysis and subset selection can be employed in a cardiovascular model to estimate total systemic resistance, cerebrovascular resistance, arterial compliance, and time for peak systolic ventricular pressure for healthy young and elderly subjects. These quantities are parameters in a simple lumped parameter model that predicts pressure and flow in the systemic circulation. The model is combined with experimental measurements of blood flow velocity from the middle cerebral artery and arterial finger blood pressure. To estimate the model parameters we use nonlinear optimization combined with sensitivity analysis and subset selection. Sensitivity analysis allows us to rank model parameters from the most to the least sensitive with respect to the output states (cerebral blood flow velocity and arterial blood pressure). Subset selection allows us to identify a set of independent candidate parameters that can be estimated given limited data. Analyses of output from both methods allow us to identify five independent sensitive parameters that can be estimated given the data. Results show that with the advance of age total systemic and cerebral resistances increase, that time for peak systolic ventricular pressure is increases, and that arterial compliance is reduced. Thus, the method discussed in this study provides a new methodology to extract clinical markers that cannot easily be assessed noninvasively.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Estimating the Parameters in Photovoltaic Modules: A Constrained Optimization Approach

This paper presents a novel identification technique for estimation of unknown parameters in photovoltaic (PV) systems. A single diode model is considered for the PV system, which consists of five unknown parameters. Using information of standard test condition (STC), three unknown parameters are written as functions of the other two parameters in a reduced model. An objective function and ...

متن کامل

The Development of Maximum Likelihood Estimation Approaches for Adaptive Estimation of Free Speed and Critical Density in Vehicle Freeways

The performance of many traffic control strategies depends on how much the traffic flow models have been accurately calibrated. One of the most applicable traffic flow model in traffic control and management is LWR or METANET model. Practically, key parameters in LWR model, including free flow speed and critical density, are parameterized using flow and speed measurements gathered by inductive ...

متن کامل

Simulation study of Hemodynamic in Bifurcations for Cerebral Arteriovenous Malformation using Electrical Analogy

Background and Objective: Cerebral Arteriovenous Malformation (CAVM) hemodynamic is disease condition, results changes in the flow and pressure level in cerebral blood vessels. Measuring flow and pressure without catheter intervention along the vessel is big challenge due to vessel bifurcations/complex bifurcations in Arteriovenous Malformation patients. The vessel geometry in CAVM patients are...

متن کامل

Hydrocracking Lumped Kinetic Model with Catalyst Deactivation in Arak Refinery Hydrocracker Unit

A kinetic model of a fixed bed tubular reactor incorporating catalyst deactivation was developed for the ISOMAX unit of Arak refinery. The kinetic parameters for the hydrocracking reactions over the commercial catalyst were determined using initial activity plant data i.e. when the catalyst is fresh. Catalyst deactivation was then taken into account by means of deactivation function based on pl...

متن کامل

Robust Identification of Smart Foam Using Set Mem-bership Estimation in A Model Error Modeling Frame-work

The aim of this paper is robust identification of smart foam, as an electroacoustic transducer, considering unmodeled dynamics due to nonlinearities in behaviour at low frequencies and measurement noise at high frequencies as existent uncertainties. Set membership estimation combined with model error modelling technique is used where the approach is based on worst case scenario with unknown but...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Mathematical biosciences and engineering : MBE

دوره 6 1  شماره 

صفحات  -

تاریخ انتشار 2009