Detail preserving impulsive noise removal

Most image processing applications require noise elimination. For example, in applications where derivative operators are applied, any noise in the image can result in serious errors. Impulsive noise appears as a sprinkle of dark and bright spots. Transmission errors, corrupted pixel elements in the camera sensors, or faulty memory locations can cause impulsive noise. Linear filters fail to suppress impulsive noise. Thus, non-linear filters have been proposed. Windyga’s peak-and-valley filter, introduced to remove impulsive noise, identifies noisy pixels and then replaces their values with the minimum or maximum value of their neighbors depending on the noise (dark or bright). Its main disadvantage is that it removes fine image details. In this work, a variation of the peak-and-valley filter is proposed to overcome this problem. It is based on a recursive minimum–maximum method, which replaces the noisy pixel with a value based on neighborhood information. This method preserves constant and edge areas even under high impulsive noise probability. Finally, a comparison study of the peak-and-valley filter, the median filter, and the proposed filter is carried-out using different types of images. The proposed filter outperforms other filters in the noise reduction and the image details preservation. However, it operates slightly slower than the peak-and-valley filter. r 2004 Elsevier B.V. All rights reserved.