A microfabricated fluidic device for performing two-dimensional liquid-phase separations.
نویسندگان
چکیده
A microfabricated fluidic device that combines micellar electrokinetic chromatography and high-speed open-channel electrophoresis on a single structure for the rapid automated two-dimensional analysis of peptides has been devised and demonstrated. The microchip operates by rapidly sampling and analyzing effluent in the second dimension from the first dimension. Second-dimension analyses are performed and completed every few seconds, with total analysis times of less than 10 min for tryptic peptides. The peak capacity of the two-dimensional separations has been estimated to be in the 500-1000 range. The orthogonality of the separation techniques, an important factor for maximizing peak capacity or resolution elements, was verified by examining each technique independently for peptide separations. The two-dimensional separation strategy was found to greatly increase the resolving power over that obtained for either dimension alone.
منابع مشابه
Microscale liquid phase separations.
Miniaturization and microfabrication of analytical instrumentation for chemical and biological analyses has been proceeding at a rapid pace for a few decades, and has gained momentum in the past decade with the introduction and application of microfabricated instruments. Motivating factors for performing microscale separations and analyses are reduced reagent, solvent and sample consumption, re...
متن کاملMicrofabricated renewable beads-trapping/releasing flow cell for rapid antigen-antibody reaction in chemiluminescent immunoassay.
A renewable flow cell integrating a microstructured pillar-array filter and a pneumatic microvalve was microfabricated to trap and release beads. A bead-based immunoassay using this device was also developed. This microfabricated device consists of a microfluidic channel connecting to a beads chamber in which the pillar-array filter is built. Underneath the filter, there is a pneumatic microval...
متن کاملParticle imaging techniques for microfabricated fluidic systems
This paper presents the design and implementation of velocimetry techniques applicable to the analysis of microfluidic systems. The application of both micronresolution particle image velocimetry (micro-PIV) and particle tracking velocimetry (PTV) to the measurement of velocity fields within micromachined fluidic channels is presented. The particle tracking system uses epifluorescent microscopy...
متن کاملA method for detecting bubbles in two-phase gas-liquid flow
Detecting bubble in two-phase flow has been a basic issue in two-phase flow systems. A new method for measuring the frequency of bubble formation is presented in this paper. For this purpose, an electronic device was designed and constructed which works based on a change in intensity of laser beam. For this purpose, continues light beam is embedded just above the needle, which is received by a ...
متن کاملUltrafast reversed-phase high-performance liquid chromatographic separations: an overview.
Ultrafast reversed-phase high-performance liquid chromatographic (HPLC) separations are often needed for analyses related to combinatorial chemistry, studies in liquid chromatography-mass spectrometry, and other applications in which very rapid sample turnaround is paramount. Unfortunately, no consensus exists regarding the best column technology for optimally performing the desired rapid separ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Analytical chemistry
دوره 72 21 شماره
صفحات -
تاریخ انتشار 2000