The oblique effect and three-dimensional shape.
نویسندگان
چکیده
The classical oblique effect refers to the finding that observers are faster and more accurate in discriminating the orientation of a line or edge when it is at or near vertical or horizontal than when it is at an oblique orientation (Appelle, 1972; Mach, 1861). Based on the finding that observer sensitivity to orientation of simple symmetric shapes like an ellipse or the letter "X" also exhibits an oblique effect, Li and Westheimer (1997) suggested that the effect does not arise solely from inequality of simple orientation-tuned receptors in early visual processing, but also involves later orientation processing that can encompass more complex inputs such as shape axes. In this work, we examined how the oblique effect impacts three-dimensional shapes defined by texture cues.
منابع مشابه
ِِDischarge Coefficient in Oblique Side Weirs
Side weirs are flow diversion devices that are widely used in irrigation, drainage and urban sewage systems. The present study focuses on the investigation of the effect of oblique side weirs on the discharge coefficient of a side weir under subcritical flow condition in rectangular channels. In this study 106 laboratory tests were conducted and the results were analyzed to find out the influen...
متن کاملNumerical Study on the Crushing Behavior of Square Tubes Under Three Dimensional Oblique Loading
This study aims to numerically investigate on the crashworthiness of thin-walled square tubes by consideration of 3-D oblique loading. In this type of loading, direction of loading is defined by using two spatial angles relative to the position of the tube. To this aim, finite element (FE) analysis is employed to simulate the loading for 8 different numerical models with different loading orien...
متن کاملStudy of the effect of shape on acoustic performance of micro perforated absorbent at low frequencies
Introduction: Micro-perforated absorbents are one of the structures that are widely used nowadays. The sound absorption mechanism is performed by viscous energy losses in the cavities on the plate. In this study, the acoustic properties of non-flat perforated panels in oblique angle was investigated in numerical method. Material and Methods: This paper examined the effect of the surface shape ...
متن کاملComparison of three different techniques in parotid gland tumors using three dimensional conformal radiation therapy
Introduction: Background: Radiotherapy of parotid tumors is achieved by different radiotherapy techniques. So they deliver the dose to organs at risk such as contralateral parotid, temporal lobe & spinal cord. The consequences of high dose to OARs are xerostomia, Temporal lobe necrosis and loss of hearing. Purpose: The aim of this study was to compare different treatment tech...
متن کاملEffect of Abutment Angulation and Material on Stress and Strain Distributions in Premaxillary Bone: A Three-Dimensional Finite Element Analysis
Background and Aim: Dental implants with angled abutments are often inserted in the anterior maxillary region due to the status of the residual ridge and aesthetic considerations. The purpose of this study was to assess stress and strain distributions in the premaxillary bone around dental implants by means of finite element analysis (FEA). Materials and Methods: Four three-dimensional (3D) fi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Visual cognition
دوره 15 1 شماره
صفحات -
تاریخ انتشار 2007