Comparison of different bonding techniques for efficient strain transfer using piezoelectric actuators
نویسندگان
چکیده
In this paper, strain transfer efficiencies from a single crystalline piezoelectric lead magnesium niobate-lead titanate substrate to a GaAs semiconductor membrane bonded on top are investigated using state-of-the-art x-ray diffraction (XRD) techniques and finite-element-method (FEM) simulations. Two different bonding techniques are studied, namely, gold-thermo-compression and polymer-based SU8 bonding. Our results show a much higher strain-transfer for the "soft" SU8 bonding in comparison to the "hard" bonding via gold-thermo-compression. A comparison between the XRD results and FEM simulations allows us to explain this unexpected result with the presence of complex interface structures between the different layers.
منابع مشابه
The dynamic behaviour of surface-bonded piezoelectric actuators with debonded adhesive layers
The performance of smart structures depends on the electromechanical behaviour of piezoelectric actuators and the bonding condition along the interface, which connects the actuators and the host structures. This paper provides a theoretical study of the effect of partially debonded adhesive layers on the coupled electromechanical behaviour of piezoelectric actuators subjected to high-frequency ...
متن کاملInvestigating the Effect of Stiffness/Thickness Ratio on the Optimal Location of Piezoelectric Actuators Through PSO Algorithm
This article has studied the effect of ratio of stiffness and thickness between piezoelectric actuators and host plat has been explored on optimal pattern for placement of piezoelectric work pieces around a hole in thin isotropic plate under static loading to reduce stress concentration. The piezoelectric actuators reduce directly or indirectly the stress concentration by applying positive and ...
متن کاملCharacterization of Multilayer Piezoelectric Actuators for Use in Active Isolation Mounts
Active mounts are desirable for isolating spacecraft science instruments from onboard vibrational sources such as motors and release mechanisms. Such active isolation mounts typically employ multilayer piezoelectric actuators to cancel these vibrational disturbances. The actuators selected for spacecraft systems must consume minimal power while exhibiting displacements of 5 to 10 μm under load....
متن کاملOPTIMIZATION OF PLACEMENTVOLTAGE OF PIEZOELECTRIC ACTUATORS ON AN L-SHAPE BEAM USING PARTICLE SWARM OPTIMIZATION ALGORITHM
In this paper, controlling the location of the tip of an L-shape beam under gravity field is investigated. The beam is covered with piezoelectric patches. The gravity filed moves the tip of beam downward and the actuators with induced voltage move the tip to the previous location. to optimize the best location and voltages for actuators, the particle swarm optimization algorithm code is develop...
متن کاملTemperature Effects on Nonlinear Vibration of FGM Plates Coupled with Piezoelectric Actuators
An analytical solution for a sandwich circular FGM plate coupled with piezoelectric layers under one-dimension heat conduction is presented in this paper. A nonlinear static problem is solved first to determine the initial stress state and pre-vibration deformations. By adding an incremental dynamic state to the pre-vibration state, the differential equations are derived. The role of thermal en...
متن کامل