Pushing energy savings in adiabatic logic by carbon-nanotube field effect transistors
نویسنده
چکیده
For the first time carbon nanotube (CNT) transistor based adiabatic logic (AL) was analyzed in this work and compared to CNT based static CMOS (CCNT). Static CCNT inverters are used as a reference and compared to inverters in the AL families Efficient Charge Recovery Logic (ECRL) and Positive Feedback Adiabatic Logic (PFAL) in terms of energy dissipation. Energy savings by adiabatic logic in dependence of operating frequency, supply voltage and number of nanotubes per transistor are reviewed. It is shown that CNT based AL circuits provide high energy saving factors even for high frequencies compared to CNT based static CMOS circuits.
منابع مشابه
Performance Analysis of Reversible Sequential Circuits Based on Carbon NanoTube Field Effect Transistors (CNTFETs)
This study presents the importance of reversible logic in designing of high performance and low power consumption digital circuits. In our research, the various forms of sequential reversible circuits such as D, T, SR and JK flip-flops are investigated based on carbon nanotube field-effect transistors. All reversible flip-flops are simulated in two voltages, 0.3 and 0.5 Volt. Our results show t...
متن کاملSymmetrical, Low-Power, and High-Speed 1-Bit Full Adder Cells Using 32nm Carbon Nanotube Field-effect Transistors Technology (TECHNICAL NOTE)
Carbon nanotube field-effect transistors (CNFETs) are a promising candidate to replace conventional metal oxide field-effect transistors (MOSFETs) in the time to come. They have considerable characteristics such as low power consumption and high switching speed. Full adder cell is the main part of the most digital systems as it is building block of subtracter, multiplier, compressor, and other ...
متن کاملBallistic (n,0) Carbon Nanotube Field Effect Transistors' I-V Characteristics: A Comparison of n=3a+1 and n=3a+2
Due to emergence of serious obstacles by scaling of the transistors dimensions, it has been obviously proved that silicon technology should be replaced by a new one having a high ability to overcome the barriers of scaling to nanometer regime. Among various candidates, carbon nanotube (CNT) field effect transistors are introduced as the most promising devices for substituting the silicon-based ...
متن کاملCMOS-based carbon nanotube pass-transistor logic integrated circuits
Field-effect transistors based on carbon nanotubes have been shown to be faster and less energy consuming than their silicon counterparts. However, ensuring these advantages are maintained for integrated circuits is a challenge. Here we demonstrate that a significant reduction in the use of field-effect transistors can be achieved by constructing carbon nanotube-based integrated circuits based ...
متن کاملBand bending engineering in p-i-n gate all around Carbon nanotube field effect transistors by multi-segment gate
The p-i-n carbon nanotube (CNT) devices suffer from low ON/OFF current ratio and small saturation current. In this paper by band bending engineering, we improved the device performance of p-i-n CNT field effect transistors (CNTFET). A triple gate all around structure is proposed to manage the carrier transport along the channel. We called this structure multi-segment gate (MSG) CNTFET. Band to ...
متن کامل