Improvements to the Two-Thickness Method for Deriving Acoustic Properties of Materials

1. ABSTRACT The characteristic impedance and other derivative acoustic properties of a material can be derived from impedance tube data using the specific impedance measured from samples with two different thicknesses. In practice, samples are chosen so that their respective thicknesses differ by a factor of 2. This simplifies the solution of the equations relating the properties of the two samples so that the computation of the characteristic impedance is straightforward. This approach has at least two drawbacks. One is that it is often difficult to acquire or produce samples with precisely a factor of 2 difference in thickness. A second drawback is that the phase information contained in the imaginary part of the propagation constant must be unwrapped before subsequent computations are performed. For well-behaved samples, this is not a problem. For ill behaved samples of unknown properties, the phase unwrapping process can be tedious and difficult to automate. Two alternative approaches have been evaluated which remove the factor-of-2 sample thickness requirement and directly compute unwrapped phase angles. One uses a Newton-Raphson approach to solve for the roots of the samples’ simultaneous equations. The other produces a wave number space diagram in which the roots are clearly discernable and easily extracted. Results are presented which illustrate the flexibility of analysis provided by the new approaches and how this can be used to better understand the limitations of the impedance tube data.