Wccm V

نویسندگان

  • E. Ferretti
  • E. Viola
  • A. Di Leo
چکیده

In this study, the problem of finding the complete trajectory of propagation in plates with internal straight cracks is extended to the non-linear field. In particular, results concerning concrete plates in bi-axial tensile loading are shown. The concrete constitutive law adopted for this purpose is monotonically non-decreasing, as following according to previous studies of the Authors on monotonic mono-axial loading. The analysis is performed in a discrete form, by means of the Cell Method (CM). The aim of this study is both to test the new concrete constitutive law in biaxial tensile load and to verify the applicability of the CM in crack propagation problems for bodies of non-linear material. The discrete analysis allows us to identify the crack initiation without using the stress intensity factors. Moreover, previous studies showed how the boundary conditions are no longer a problem with the CM. These two circumstances involve computational simplifications in cracked solids of finite dimensions. An example of computation in finite solids, the skew-symmetric four-point bending beam, is provided. E. Ferretti, E. Viola, A. Di Leo

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

WCCM V -- Authors' Guidelines for Full Paper Submission

The paper is devoted to theoretical and computational studies on application of the multiresolutional wavelet-based homogenization approach in the Finite Element Method modeling of heterogeneous media. Multiresolutional homogenization scheme is proposed for 1D elastostatic equilibrium problem of periodic heterogeneous medium with Young modulus defined by some elementary wavelet functions and co...

متن کامل

WCCM V -- Authors' Guidelines for Full Paper Submission

This paper describes a three-dimensional parallel solution scheme for inverse dynamics of link mechanisms, which has already been proposed for the two-dimensional case and applied in several inplane motions. In this theory, the entire system is subdivided into finite elements and evaluated as a continuum. A single-link structure of a pin joint and a rigid bar is expressed using the Shifted Inte...

متن کامل

WCCM V -- Authors' Guidelines for Full Paper Submission

In the design of many mechanical systems, the human designer knows its topology and shape. The goal for computational design thus results in finding a parameter set that optimizes multiple design goals. This paper presents a novel optimization method for such parametric design, the process of which is based on the human design process, but the search algorithm of which is gradient-based for eff...

متن کامل

Activity intensity, assistive devices and joint replacement influence predicted remodelling in the proximal femur.

Bone morphology and density changes are commonly observed following joint replacement, may contribute to the risks of implant loosening and periprosthetic fracture and reduce the available bone stock for revision surgery. This study was presented in the 'Bone and Cartilage Mechanobiology across the scales' WCCM symposium to review the development of remodelling prediction methods and to demonst...

متن کامل

Activity Intensity, Assistive Devices and Joint Replacement Influence Predicted Remodelling in the Proximal Femur

Bone morphology and density changes are commonly observed following joint replacement, and may contribute to the risks of implant loosening and periprosthetic fracture, and reduce the available bone stock for revision surgery. This study was presented in the “Bone and Cartilage Mechanobiology across the scales” WCCM symposium to review the development of remodelling prediction methods and to de...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2003