27 Application of Electrochemical Impedance Spectroscopy ( EIS ) and X - ray Photoelectron Spectroscopy ( XPS ) to the Characterization of RTILs for Electrochemical Applications
نویسنده
چکیده
Ionic liquids (ILs) are low temperature molten salts, that is, a salt in the liquid state. ILs used to present a very low vapour pressure and this property makes of the ILs key materials for the development of a wide variety of emerging technologies. The stability of ILs at high temperatures (several hundred degrees), low combustibility, and even the relatively high viscosity of some of them compared to conventional solvents, are characteristic of interest for some applications. Due to the large diversity of ILs components, they may present wide structural variations which can be used to design the IL with more adequate properties for a particular application. These applications might include new types of lubricants and fluids for thermal engines, electrodeposition, energy and CO2 capture devices, biomimetics, double layer capacitors,.....in fact, the scientific and technological importance of the ILs spans nowadays to a wide range of applications [1-5]. Among the energy devices, polymer-electrolyte membranes for fuel cell application are under development as a way to reduce global warming and energy cost and ILs incorporation in the structure of Nafion, a typical membrane for fuel cell use, is under study [6-8]. Since transport properties of porous and dense membranes can be modified with the addition of substances which could favour/reject the pass of some of the particles or ions in a mixture, the incorporation of a particular IL in the structure of a membrane may increase its selectivity and/or specificity. Chemical characterization and determination of electrical parameters for different ILs as well as the changes associated to water incorporation, a subject of interest for different electrochemical applications, is considered in this work. Moreover, due to the importance that membrane separation technology has nowadays, modification of membranes with different structures by incorporation of RTILs or IL-cations and their effect on mass and charge transport is also presented. Ionic liquids, membranes and membranes/IL-modified samples were chemically characterized by X-ray photoelectron spectroscopy (XPS). This technique allows the
منابع مشابه
Eco-friendly nitrogen-containing carbon encapsulated LiMn2O4 cathodes to enhance the electrochemical properties in rechargeable Li-ion batteries
This study describes the synthesis of nitrogen-containing carbon (N-C) and an approach to apply the N-C material as a surface encapsulant of LiMn2O4 (LMO) cathode material. The N heteroatoms in the N-C material improve the electrochemical performance of LMO. A low-cost wet coating method was used to prepare N-C@LMO particles. The N-C@LMO was characterized by X-ray diffraction (XRD), X-ray photo...
متن کاملELECTROCHEMICAL CHARACTERISATION OF X10CrNi 18-8 STEEL IN ARTIFICIAL PLASMA
J. Przondziono, Faculty of Materials Science and Metallurgy, Silesian University of Technology, Katowice, Poland, W. Walke, Faculty of Biomedical Engineering, Silesian University of Technology, Zabrze, Poland Quality of applied guide wires conditions the course of treatment and its success to a great extent. In order to simulate conditions that can be found in blood vascular system samples were...
متن کاملFacile preparation of nickel/carbonized wood nanocomposite for environmentally friendly supercapacitor electrodes
We are reporting a facile way to prepare nickel/carbon nanocomposites from wood as a novel electrode material for supercapacitors. The surface morphology and the structure of the as-prepared electrodes were studied by using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The results indicate that aft...
متن کاملCopper Corrosion in Aqueous Sulfide Solutions under Nuclear Waste Repository Conditions
The corrosion behavior of oxygen-free copper in anoxic sulfide solutions under nuclear waste disposal conditions was studied using electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) equipped with a focused ion beam (FIB), X-ray photoelectron spectroscopy (XPS) and Micro X-ray diffraction ( XRD). The film growth process and mechanism were elucidated using an Au mark...
متن کاملCharacterization of active and porous sublayers of a composite reverse osmosis membrane by impedance spectroscopy, streaming and membrane potentials, salt diffusion and X-ray photoelectron spectroscopy measurements
Electrokinetic, structural and surface chemical characterizations of both active and porous sublayers of a composite (polyamide/polysulfone) reverse osmosis membrane were carried out by different techniques: (i) electrochemical impedance spectroscopy (EIS) allows both electrical and geometrical characterizations using equivalent circuits as models; (ii) surface chemical composition of the activ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012