Summary of SLAC’S SEY Measurement On Flat Accelerator Wall Materials
نویسندگان
چکیده
The electron cloud effect (ECE) causes beam instabilities in accelerator structures with intense positively charged bunched beams. Reduction of the secondary electron yield (SEY) of the beam pipe inner wall is effective in controlling cloud formation. We summarize SEY results obtained from flat TiN, TiZrV and Al surfaces carried out in a laboratory environment. SEY was measured after thermal conditioning, as well as after low energy, less than 300 eV, particle exposure.
منابع مشابه
Suppression of the Effective Secondary mission Yield for a Grooved Metal Surface
We show t than a flat one. Two d of strong magnetic fie Linear Collider Collaboration Tech Notes act This note documents a set of expressions used to explore the issue of whether or not it is reasonable to er a conventional positron source for a Tesla formatted beam. The critical issue is that of energy deposition in the sion target and the comparison of the induced stress with the ultimate ten...
متن کاملSey and Electron Cloud Build-up with Neg Materials
A. Rossi, CERN, Geneva, Switzerland Abstract The LHC room temperature sections will be coated with non-evaporable getter (NEG) materials for, among other reasons, their properties of antimultipactor. Laboratory measurements of secondary electron yields (SEY) of TiZrV NEG coatings have shown that after 2 h heat treatment at 160 and 200 C, the maximum SEY decreases from 2 to below 1.4 and 1.1 res...
متن کاملEffect of Material and Wall Thickness Buildup Caps on the Head ScatterFactor Measurements in Irregular Fields Shielded by Cerrobend
Introduction: The head scatter factor (Sc) is important to measurements radiation beam and beam modeling of treatment planning systems used for advanced radiation therapy techniques. This study aimed to investigate the design of a mini-phantom to measurement variations in collimator Sc in the presence of shielding blocks for shaping the beam using different field sizes. <str...
متن کاملDevelopement a simple point source model for Elekta SL-25 linear accelerator using MCNP4C Monte Carlo code
Background: Monte Carlo (MC) modeling of a linear accelerator is a prerequisite for Monte Carlo dose calculations in external beam radiotherapy. In this study, a simple and efficient model was developed for Elekta SL-25 linear accelerator using MCNP4C Monte Carlo code Materials and methods: The head of Elekta SL-25 linac was simulated for 6 and 18 MV photon beams using MCNP4C MC code. Energ...
متن کاملExperimental Studies on Grooved Surfaces to Suppress Secondary Electron Emission
Grooved surfaces are effective to suppress the secondary electron emission, and can be a promising technique to mitigate the electron cloud effect in positron/proton storage rings. Aiming for the application in a dipole-type magnetic field, various shapes of triangular grooved surfaces have been studied at KEK. The grooves tested here have vertex angles of 20−30°, depths of 2.5−5.0 mm, and vert...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007