A mesh-dependent model for applying dynamic contact angles to VOF simulations
نویسندگان
چکیده
Article history: Received 8 April 2008 Received in revised form 10 March 2009 Accepted 15 April 2009 Available online 3 May 2009
منابع مشابه
Effects of Loading Conditions on Hydrodynamics of a Hard-Chine Planing Vessel Using CFD and a Dynamic Model
Planing vessels usually have low ratios of resistance to weight, so they can move fast on sea surface than the displacement or semi-displacement ships. Access to higher speeds is one of the attractions for designers and users. To achieve higher speeds, reducing the hydrodynamic resistance is a necessity for this class of vessels. In this study, a 3D finite volume approach is used to analyze the...
متن کاملVOF simulations of the contact angle dynamics during the drop spreading: standard models and a new wetting force model.
INTRODUCTION In this study,a novel numerical implementation for the adhesion of liquid droplets impacting normally on solid dry surfaces is presented. The advantage of this new approach, compared to the majority of existing models, is that the dynamic contact angle forming during the surface wetting process is not inserted as a boundary condition, but is derived implicitly by the induced fluid ...
متن کاملPreliminary results on multi-body dynamic simulation of a new test rig for wheel-rail contact
The ability to perform rolling contact fatigue (RCF) experiments in wheel–rail material is provided by a new small–scale test rig, manifesting the actual dynamic behaviour of the railway system. In this paper, a multi-body dynamics (MBD) model is proposed, simulating the vibration behaviour of the prescribed rig. The new testing facility is modelled using a three-dimensional model of the vehicl...
متن کاملNumerical Solution of the Symmetric Water Impact of a Wedge Considering Dynamic Equations of Motion
In this research, numerical simulation of a symmetric impact of a 2-D wedge, considering dynamic equations in two-phase flow is taken into account. The two-phase flow around the wedge is solved based on finite volume method and volume of fluid (VOF) scheme. The dynamic mesh model is used to simulate dynamic motion of the wedge, thereby the effects of different dynamic meshes in both structured ...
متن کاملNumerical Study on Resistance of a Bulk Carrier Vessel Using CFD Method
Bulk carriers have an important role in international maritime transport. In this paper, we carried out a numerical study on a model of bulk carrier vessel and calculated total resistance of the model. A model of a bulk carrier vessel with length of 2.76 m, breadth of 0.403 m and draught of 0.173 m was selected for numerical modeling. Numerical work was done by commercial CFD software ANSY...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- J. Comput. Physics
دوره 228 شماره
صفحات -
تاریخ انتشار 2009