Crosstalk Fault Testing by Using Oscillation Ring Testing Methodology for Soc Interconnection Lines
نویسندگان
چکیده
The advance in IC processing technology rapidly reduces spacing between adjacent wires; which renders crosstalk fault an important source of anomaly in deep subcicrom VLSI. As a result, crosstalk fault detection should be an essential part in SOC testing. Although IEEE P1500 has been developed to test interconnects in SOC. this standard is not suitable for coupling fault testing. In this paper, we propose a new testing scheme, namely the oscillation ring testing. This method is very efficient for crosstalk fault detection, which is otherwise very difficult under traditional test scheme. We also propose a systematic way to find out oscillation rings and test patterns. We have conducted experiments on the proposed scheme with several test circuits consisting of ISCAS benchmarks, and the results show that crosstalk faults can be detected with a very small number of test patterns.
منابع مشابه
IEEE Standard 1500 Compatible Oscillation Ring Test Methodology for Interconnect Delay and Crosstalk Detection
A novel oscillation ring (OR) test scheme and architecture for testing interconnects in SOC is proposed and demonstrated. In addition to stuck-at and open faults, this scheme can also detect delay faults and crosstalk glitches, which are otherwise very difficult to be tested under the traditional test schemes. IEEE Std. 1500 wrapper cells are modified to accommodate the test scheme. An efficien...
متن کاملLook up Table Based Low Power Analog Circuit Testing
In this paper, a method of low power analog testing is proposed. In spite of having Oscillation Based Built in Self-Test methodology (OBIST), a look up table based (LUT) low power testing approach has been proposed to find out the faulty circuit and also to sort out the particular fault location in the circuit. In this paper an operational amplifier, which is the basic building block in the ana...
متن کاملSelf-Test Methodology for At-Speed Test of Crosstalk in Chip Interconnects
The effect of crosstalk errors is most significant in highperformance circuits, mandating at-speed testing for crosstalk defects. This paper describes a self-test methodology that we have developed to enable on-chip at-speed testing of crosstalk defects in System-on-Chip interconnects. The self-test methodology is based on the Maximal Aggressor Fault Model [13], that enables testing of the inte...
متن کاملOscillation Test Methodology for Built-In Analog Circuits
This article aims to describe the fundamentals of analog and digital testing methods to analyze the difficulties of analog testing and to develop an approach to test the analog components in a mixed signal circuit environment. Oscillation based, built-in self-test methodology for testing analog components in mixed-signal circuits, in particular, is discussed. A major advantage of the OBIST meth...
متن کاملPower System Typical Load Profiles Using A New Pattern Recognition Methodology
SoC Functional Intellectual Property Infrastructure that differ by minimal set of the embedded diagnosis processes in real time and enables to realize such services like functional testing on basis of generable input patterns and analysis of output reactions; SoC diagnosis with given resolution of fault location; fault simulation to carry out the first two procedures on basis of the fault detec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005