Behavioral Simulation of a 4-Order CT Delta-Sigma ADC with VCO-Based Integrator and Quantizer
نویسنده
چکیده
Setup Download and install the CppSim Version 3 package (i.e., download and run the self-extracting file named setup_cppsim3.exe) located at: Upon completion of the installation, you will see icons on the Windows desktop corresponding to the PLL Design Assistant, CppSimView, and Sue2. Please read the " CppSim (Version 3) Primer " document, which is also at the same web address, to become acquainted with CppSim and its various components. You should also read the manual " PLL Design Using the PLL Design Assistant Program " , which is located at http://www.cppsim.com, to obtain more information about the PLL Design Assistant as it is briefly used in this document. To run this tutorial, you will also need to download the file vco_ctsd_example.tar.gz available at http://www.cppsim.com, and place it in the Import_Export directory of CppSim (assumed to be c:/CppSim/Import_Export). Once you do so, start up Sue2 by clicking on its icon, and then click on Tools->Library Manager as shown in the figure below. In the CppSim Library Manager window that appears, click on the Import Library Tool button as shown in the figure below. In the Import CppSim Library window that appears, change the Destination Library to vco_ctsd_example, click on the Source File/Library labeled as vco_ctsd_example.tar.gz, and then press the Import button as shown in the figure below. Note that if vco_ctsd_example.tar.gz does not appear as an option in the Source File/Library selection listbox, then you need to place this file (downloaded from Once you have completed the above steps, restart Sue2 as directed in the above figure.
منابع مشابه
A 0.13[mu]m CMOS 78dB SNDR 87mW 20MHz BW CT [Delta Sigma] ADC with VCO-based integrator and quantizer
متن کامل
Vco-Based continuous-Time Sigma Delta ADC Based on a Dual-VCO-quantizer-Loop Structure
This paper explores a continuous time (CT) sigma delta ( ) analog-to-digital converter (ADC) based on a dual-voltage-controlled oscillator (VCO)-quantizer-loop structure. A thirdorder ̄lter is adopted to reduce quantization noise and VCO nonlinearity. Even-order harmonics of VCO are signi ̄cantly reduced by the proposed dual-VCO-quantizer-loop structure. The prototype with 10MHz bandwidth and 400...
متن کاملA 12-Bit, 10-MHz Bandwidth, Continuous-Time Sigma-Delta ADC with a 5-Bit, 950-MS/s VCO-Based Quantizer
The use of VCO-based quantization within continuous-time (CT) analog-to-digital converter (ADC) structures is explored, with a custom prototype in 0.13 m CMOS showing measured performance of 86/72 dB SNR/SNDR with 10 MHz bandwidth while consuming 40 mW from a 1.2 V supply and occupying an active area of 640 m 660 m. A key element of the ADC structure is a 5-bit VCO-based quantizer clocked at 95...
متن کاملTime-Mode Signal Quantization for Use in Sigma-Delta Modulators
The rapid scaling in modern CMOS technology has motivated the researchers to design new analog-to-digital converter (ADC) architectures that can properly work in lower supply voltage. An exchanging the data quantization procedure from the amplitude to the time domain, can be a promising alternative well adapt with the technology scaling. This paper is going to review the recent development in t...
متن کاملWide-Band Continuous-Time Σ∆ Modulator With VCO Quantizer
A methodology for the design of Continuous-Time (CT) Sigma-Delta (Σ∆) modulators with VCO-based quantizer is proposed. The coefficients of the CT Σ∆ modulator are accurately calculated such that the noise transfer function of the modulator is exactly the same as a Discrete-Time (DT) Σ∆ modulator of the same order. Several design examples for different modulator orders and feedback DAC signal sh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009