Review of Ranque–Hilsch effects in vortex tubes

نویسندگان

  • Smith Eiamsa-ard
  • Pongjet Promvonge
چکیده

The vortex tube or Ranque–Hilsch vortex tube is a device that enables the separation of hot and cold air as compressed air flows tangentially into the vortex chamber through inlet nozzles. Separating cold and hot airs by using the principles of the vortex tube can be applied to industrial applications such as cooling equipment in CNC machines, refrigerators, cooling suits, heating processes, etc. The vortex tube is well-suited for these applications because it is simple, compact, light, quiet, and does not use Freon or other refrigerants (CFCs/HCFCs). It has no moving parts and does not break or wear and therefore requires little maintenance. Thus, this paper presents an overview of the phenomena occurring inside the vortex tube during the temperature/energy separation on both the counter flow and parallel flow types. The paper also reviews the experiments and the calculations presented in previous studies on temperature separation in the vortex tube. The experiment consisted of two important parameters, the first is the geometrical characteristics of the vortex tube (for example, the diameter and length of the hot and cold tubes, the diameter of the cold orifice, shape of the hot (divergent) tube, number of inlet nozzles, shape of the inlet nozzles, and shape of the cone valve. The second is focused on the thermo-physical parameters such as inlet gas pressure, cold mass fraction, moisture of inlet gas, and type of gas (air, oxygen, helium, and methane). For each parameter, the temperature separation mechanism and the flow-field inside the vortex tubes is explored by measuring the pressure, velocity, and temperature fields. The computation review is concentrated on the quantitative, theoretical, analytical, and numerical (finite volume method) aspects of the study. Although many experimental and numerical studies on the vortex tubes have been made, the physical behaviour of the flow is not fully understood due to its complexity and the lack of consistency in the experimental findings. Furthermore, several different see front matter r 2007 Elsevier Ltd. All rights reserved. .rser.2007.03.006 nding author. Tel.: +662 3264197; fax: +662 3264198. dresses: [email protected] (S. Eiamsa-ard), [email protected] (P. Promvonge). 662 9883666x241.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

2D Numerical Simulation of a Micro Scale Ranque-Hilsch Vortex Tube

  In this study, fluid flow and energy separation in a micro-scale Ranque-HilschVortex Tube are numerically investigated. The flow is assumed as 2D, steady,compressible ideal gas, and shear-stress-transport SST k-W is found to be a bestchoice for modeling of turbulence phenomena. The results are in a good agreementwith the experimental results reported in the literature. The results show that f...

متن کامل

Performance Evaluation of a Ranque-Hilsch Vortex Tube with Optimum Geometrical Dimensions

 A brass Vortex Tube (VT) with interchangeable parts is used to determine the optimum cold end orifice diameter, main tube length and diameter. Experim...

متن کامل

3D Velocimetry and droplet sizing in the Ranque–Hilsch vortex tube

The Ranque–Hilsch vortex tube (RHVT) is a device currently used to generate local cooling. In general, the fluid that is injected into the RHVT is a single-phase gas. In this study, however, we have added a dispersed phase (water droplets) to the gas (nitrogen). By means of phase Doppler particle analysis, three velocity components, their higher order moments, and sizes of droplets were measure...

متن کامل

Maxwell's demon in the Ranque-Hilsch vortex tube.

A theory was developed that explains energy separation in a vortex tube, known as one of the Maxwellian demons. It appears that there is a unique relation between the pressures in the exits of the vortex tube and its temperatures. Experimental results show that the computed and measured temperatures are in very good agreement.

متن کامل

Optimization of Low Pressure Vortex Tube via Different Axial Angles of Injection Nozzles

In this article, a Ranque–Hilsch Vortex Tube has been optimized utilizing axial angles for nozzles. Effect of nozzles angles on the flow behavior has been investigated by computational fluid dynamics (CFD) techniques. A finite volume approach with the standard k–ε turbulence model has been used to carry out all the computations. The dimensions of studied vortex tubes are kept the same for all m...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008