Cdc Cathode Simulation
نویسنده
چکیده
Full simulation of the CDC cathode data is made with the image charge method and ion statistical model. The model well reproduces the actual cathode charge distribution and shows reasonable agreement of the spatial resolution with the measurement. The simulation code is implemented in GSIM and lls raw data table, hence this can be used in studying tracking trigger and developing reconstruction codes.
منابع مشابه
Design and Simulation of Hot Cathode Ionization Vacuum Gauge with no X-Ray Limitations
In this paper, the MEMS type ionization gauge with no X-Ray limitations has been presented. Having the dimensions of 2.4 mm× 0.8mm × 1.4 mm, the designed gauge is 9000 times smaller than the conventional type and can operate in HV and UHV pressures up to 5×10-9 torr. Operating at the temperature of 750°C, the cathode of proposed gauge is implemented using nickel and works in a way in...
متن کاملWater Management in the Cathode Side of a PEM Fuel Cell
A one dimensional isothermal mathematical modeling of cathode side of a Proton Exchange Membrane (PEM) fuel cell is developed for the water management problem. Water transport is investigated in both cathode Gas Diffusion Layer (GDL) and membrane through solving appropriate equations for fluid flow and mass transport in GDL and water transport within the membrane. The gaseous mixture flowing in...
متن کاملThermal Conductivity of Single-Wall Carbon Nanotubes
Despite the significant amount of research on single-wall carbon nanotubes, their thermal conductivity has not been well established. To date only one experimental thermal conductivity measurement has been reported for these molecules around room temperature, with large uncertainty in the thermal conductivity values. Existing theoretical predictions based on molecular dynamics simulation range ...
متن کاملThree-dimensional structural analysis using Interactive Graphics
-Three-dimensional finite element structural analysis computer programs can only be used effectively when the input can be accurately generated and checked, and the output correctly examined. With the use of the Sandia Interactive Graphics System, SIGS, which consists of a cathode ray tube, a mini-computer, a CDC 6600 computer and an interactive graphics computer software system, both input and...
متن کاملFabrication and Simulation of Self-Focusing Field Emission X-ray Tubes
A self-focusing field emission (FE) X-ray tube with a large-area cathode design was simulated and fabricated. The designed X-ray tube had a cylindrically symmetric geometry; the diameter of the cathode and the anode was 15 mm, and the cathode-anode distance was 20 mm. Owing to the unique cup-shaped design of the cathode, the electron beam emitted from the large-area cathode was focused onto the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2007