Sulfur‐Doped Carbon with Enlarged Interlayer Distance as a High‐Performance Anode Material for Sodium‐Ion Batteries
نویسندگان
چکیده
S-doped carbon is investigated as a high-performance anode material for sodium-ion batteries. Due to the introduction of a high-content of S atoms, the as-obtained S-doped carbon shows an enlarged interlayer distance. As an anode, a high specific capacity of up to 303 mAh g-1 is achieved, even after 700 cycles at 0.5 A g-1.
منابع مشابه
SnO2 Nanowires on Carbon Nanotube Film as a High Performance Anode Material for Flexible Li-ion Batteries
Today, Li-ion batteries (LIBs) are the most common rechargeable batteries used in electronic devices. SnO2 with theoretical specific capacity of 782 mAh/g is among the best anode materials for LIBs. In this report, Three-dimensional SnO2 nanowires (NWs) on carbon nanotube (CNT) thin film (SnO2 / CNT) is fabricated using a combination of vacuum filtration and thermal evaporation techniques. The ...
متن کاملNitrogen-doped porous carbon nanosheets as low-cost, high-performance anode material for sodium-ion batteries.
Between the sheets: Sodium-ion batteries are an attractive, low-cost alternative to lithium-ion batteries. Nitrogen-doped porous carbon sheets are prepared by chemical activation of polypyrrole-functionalized graphene sheets. When using the sheets as anode material in sodium-ion batteries, their unique compositional and structural features result in high reversible capacity, good cycling stabil...
متن کاملLarge‐Area Carbon Nanosheets Doped with Phosphorus: A High‐Performance Anode Material for Sodium‐Ion Batteries
Large-area phosphorus-doped carbon nanosheets (P-CNSs) are first obtained from carbon dots (CDs) through self-assembly driving from thermal treatment with Na catalysis. This is the first time to realize the conversion from 0D CDs to 2D nanosheets doped with phosphorus. The sodium storage behavior of phosphorus-doped carbon material is also investigated for the first time. As anode material for ...
متن کاملFacile synthesis of MoS2@CMK-3 nanocomposite as an improved anode material for lithium-ion batteries.
MoS(2)@CMK-3 nanocomposite consisting of confined nanosized MoS(2) in CMK-3 carbon matrix exhibits much improved cycling performance and rate capability due to the enlarged interlayer distance and favorable conductivity.
متن کاملNitrogen doped porous carbon fibres as anode materials for sodium ion batteries with excellent rate performance.
Nitrogen-doped activated porous carbon fibres (ACFs) were prepared as anode materials for Na-ion batteries. They exhibit excellent electrochemical performance, especially rate performance. The excellent rate performance is ascribed to the fibre-like morphology and the facilitated charge transfer. The influence of nitrogen functionalities on charge transfer and electrochemical performance of N-d...
متن کامل