Heat transfers in a double-skin roof ventilated by natural convection in summer time
نویسندگان
چکیده
The double-skin roofs investigated in this paper are formed by adding a metallic screen on an existing sheet metal roof. The system enhances passive cooling of dwellings and can help diminishing power costs for air conditioning in summer or in tropical and arid countries. In this work, radiation, convection and conduction heat transfers are investigated. Depending on its surface properties, the screen reflects a large amount of oncoming solar radiation. Natural convection in the channel underneath drives off the residual heat. The bi-dimensional numerical simulation of the heat transfers through the double skin reveals the most important parameters for the system’s efficiency. They are, by order of importance, the sheet metal surface emissivity, the screen internal and external surface emissivity, the insulation thickness and the inclination angle for a channel width over 6cm. The influence of those parameters on Rayleigh and Nusselt numbers is also investigated. Temperature and air velocity profiles on several channel cross sections are plotted and discussed.
منابع مشابه
گنبد دوپوسته از منظر عملکرد حرارتی در اقلیم کویری کاشان
Since a large part of Iran is located in hot-dry climate, also the maximum amount of radiation absorbed is done from the roof in low-lying buildings among other facades in summer. And also the maximum area of the outer shell of the building is dedicated to the ceiling. Further, the most energy consumption is devoted to the building, and there is high cost of cooling in the summer in Iran. Henc...
متن کاملInvestigation on thermal behavior of common types of roofs in buildings using computational fluid dynamics method
In this study, the influence of type and structure of different roofing systems were investigated using computational fluid dynamic method. The considered roofing systems include beam and block types (clay brick, light weight concrete block, polystyrene) and Uboot slab which were designed for 6m and 8m span. To simulate the fluid flow and heat transfer, the computational fluid dynamic method wa...
متن کاملEffects of Geometrical Dimension on Mixed Convection Heat Transfer in Cavities
In this paper, mixed forced and natural convection heat transfer in a rectangular cavity has been numerically studied. the cavity receives a uniform heat flux from one side and is ventilated with a uniform external flow. The external flow enters the cavity from the heated side and leaves the cavity from the opposite side. The velocity and temperature fields and heat transfer rate are determined...
متن کاملEffects of Geometrical Dimension on Mixed Convection Heat Transfer in Cavities
In this paper, mixed forced and natural convection heat transfer in a rectangular cavity has been numerically studied. the cavity receives a uniform heat flux from one side and is ventilated with a uniform external flow. The external flow enters the cavity from the heated side and leaves the cavity from the opposite side. The velocity and temperature fields and heat transfer rate are determined...
متن کاملMixed Convection Flow in a Rectangular Ventilated Cavity with a Heat Conducting Solid Circular Cylinder at the Center
A numerical investigation has been carried out for mixed convection flow in a rectangularventilated cavity with a heat conducting solid circular cylinder at the center. Forced convection flowconditions were imposed by providing an inlet at the bottom of the left wall and an outlet vent at the topto the other sidewall. In this paper, the effect of cavity aspect ratio as well as the mixed convect...
متن کامل