Analysis of the Monomeric Friction Coefficient of Elastomers by Means of Dynamic Mechanical Properties
نویسندگان
چکیده
The variation of the monomeric friction coefficient of styrene butadiene copolymer (SBR) and natural rubber (NR) with various degrees of cure was analyzed. Samples with different levels of cure were prepared. Loss tangent measurements of the samples were performed by means of a damped torsion pendulum between 173 K and 373 K. Data were analyzed in the frame of the Kloczkowsky, Mark and Frisch model (KMF) and the monomeric friction coefficients and the relaxation strength were obtained for each condition.
منابع مشابه
Damping Behavior of the Phenolic Based Composite Friction Materials Containing Thermoplastic Elastomers (TPEs)
Attempts have been made for the first time to produce a friction material with thermal sensitive modulus by the inclusion of combined plastic/rubber properties of thermoplastic elastomers (TPE) as viscoelastic polymeric materials into the formulation for the purpose of increasing the damping behavior. In order to evaluate the viscoelastic parameters such as loss factor (tan δ) and elastic m...
متن کاملInfluences of NCO/OH and triol/diol Ratios on the Mechanical Properties of Nitro-HTPB Based Polyurethane Elastomers
The present study describes the effect of NCO/OH and triol/diol ratios on the mechanical properties of Nitro functionalized Hydroxyl-terminated polybutadiene (Nitro-HTPB) elastomers. The progress of the cure reaction of Nitro-HTPB and toluene diisocyanate (TDI) is evaluated by following up the variations in the IR absorption bands of the NCO stretching and the CO ...
متن کاملEffect of N2 partial pressure on the structural and mechanical properties of TaN films
TaN films with different N2 partial pressure were deposited on 304 stainless steel using the magnetron sputtering method. The effect of gas pressure on the mechanical property, morphology and phase structure of the films is investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), microhardness testing, friction coefficient measurements, and wear mechanism study. The XRD results c...
متن کاملAn Investigation Into the Effects of Friction and Anisotropy Coefficients and Work Hardening Exponent on Deep Drawing With FEM
Large strains, anisotropy of mechanical properties of materials and Coulomb friction in contact regions are some properties in the analysis of deep drawing process. In this research, the effects of different parameters such as anisotropy coefficient, work hardening exponent and friction coefficient on deep drawing process of drawing quality steel are studied. For this purpose, the finite elemen...
متن کاملDesign of a New Instrument for Measuring Frictional Properties of Woven Fabrics
Friction measurement is one of important and interesting problems in the study of handle properties of fabrics. Different methods have been developed for measuring friction, such as sliding, KES and cyclic testing method. In this research, considering the possibilities of varying conditions in measuring friction, a new instrument by which the bottom surface of fabric can be moved and the top sl...
متن کامل