Effect of metal priming agents on bond strength of resin-modified glass ionomers joined to gold alloy.
نویسندگان
چکیده
The aim of this study was to evaluate in vitro the shear bond strength to a gold alloy of RMGICs combined with three metal priming agents. Gold alloy was primed with one of the following materials: Alloy Primer, Metal Primer II, or Metaltite. Non-treated group was considered as the control. Specimens were bonded with one of the following luting agents: Super-Bond C&B, Vitremer Luting Cement, Fuji Lute, or Xeno Cem Plus. Shear bond strength was then determined. The bond strengths of resin-modified glass ionomer cements primed with the metal priming agents were greater than that of non-treated group, except for the Vitremer Luting Cement-Alloy Primer combination. It was thus concluded that the priming agents employed in this study were substantially effective in improving the bonding of resin-modified glass ionomer cements to gold alloy.
منابع مشابه
Influence of storage conditions and effect of metal priming agents on bond strength of resin-modified glass ionomers to gold alloy.
This study evaluated the influence of water storage conditions and the effect of metal priming agents on bond strength and durability of four luting agents joined to gold alloy. Disk specimens were cast from a gold alloy (Degudent U), and the surfaces were ground flat with abrasive paper. Three surface conditions employed were: unprimed, primed with Alloy Primer, and primed with Metaltite. Thre...
متن کاملبررسی استحکام باند برشی گلاس آینومرهای Conventional و Modified Resin بر سطوح مینا، عاج و سمان
Introduction: According to appropriate characteristics of glass ionomer cementum and constant increase of its usage in restorative field, so comparison of conventional and resin- modified glass ionomers seems to be useful. This study was designed to determine the shear bond strength of conventional and resin- modified glass Ionomers on enamel, dentin and cementum. Methods: This was an experime...
متن کاملEffects of Aging on Compressive Strength of Two Resin-Reinforced Glass Ionomers: An In-Vitro Study
Background and Aim: Although the physical properties of modern glass ionomers have been extensively reported, few studies have examined how these parameters change with age. This experimental study aimed to investigate the effect of aging on the compressive strength of resin-reinforced glass ionomers. Material and Methods: Two glass ionomers (Fuji IX GP Fast, GC, Japan, and Ketac Universal, 3M,...
متن کاملEffect of Type of Surface Treatment and Adhesive System on Shear Bond Strength of Composite Resin to a Non-Precious Metal Alloy
Background and Aim: Fractured metal-ceramic restorations may be repaired with composite in some cases to postpone the fabrication of a new restoration. Knowledge about the bond strength can help predict the success rate of this treatment modality. The aim of this study was to assess the effect of two types of mechanical surface treatment of metal along with the use of different adhesive systems...
متن کاملEffect of Incorporation of Nano-Hydroxyapatite and Nano-Zinc Oxide in Resin Modified Glass Ionomer Cement on Metal Bracket Debonding
Background and Aim: Use of fluoride releasing materials to decrease the risk of demine-ralization around orthodontic brackets would be reasonable as an adhesive for bracket bonding only if they provide acceptable shear bond strength (SBS). The aim of this study was to evaluate the SBS of resin-modified glass ionomer cements (RMGICs) modified by nano-zinc oxide (NZnO) and nano- hydroxyapatite (N...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Dental materials journal
دوره 26 5 شماره
صفحات -
تاریخ انتشار 2007