Inflammatory response to a novel series of siloxane-crosslinked polyurethane elastomers having controlled biodegradation.

نویسندگان

  • Nicholas P Rhodes
  • Juan M Bellón
  • M Julia Buján
  • Giorgio Soldani
  • John A Hunt
چکیده

A series of polyurethane polymers was synthesized with increasing proportions of silicone in the form of polydimethylsiloxane (PDMS) utilised as a cross-linking agent, based on an aromatic, non-biostable polyetherurethane (PEtU). Eight formulations ranging from 0-50% PDMS were constructed into porous and non-porous films. These were implanted subcutaneously in rats, both unstrained and 100% strained, for 3 and 6 months. Degradation was determined by FTIR-ATR. Porous films were implanted for 6 and 12 months intramuscularly in both rats and rabbits. These were explanted and examined for inflammatory cell markers by immunohistochemistry. Both low and high percentages of siloxane gave rise to increased degradation, with 20-40% PDMS resulting in the least degradation. Infrared spectral changes correlated well with both visual examination and observation by SEM. Changes to the concentration of siloxane gave rise to differences in the thickness of fibroblastic capsule and infiltration of inflammatory cells in both films & scaffolds. Cellular infiltration was greatest in the films with lower siloxane concentrations. Macrophage activation (MHC-I & MHC-II expression) was least in the higher siloxane variants. It is concluded that by varying the siloxane content in the PEtU matrix we can obtain an acceptable inflammatory response with a relatively short degradation time.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influences of NCO/OH and triol/diol Ratios on the Mechanical Properties of Nitro-HTPB Based Polyurethane Elastomers

The present study describes the effect of NCO/OH and triol/diol ratios on the mechanical properties of Nitro functionalized Hydroxyl-terminated polybutadiene (Nitro-HTPB) elastomers. The progress of the cure reaction of Nitro-HTPB and toluene diisocyanate (TDI) is evaluated by following up the variations in the IR absorption bands of the NCO stretching and the CO ...

متن کامل

Preparation and Evaluation of Blood Compatibility of Novel Epoxy-Modified Polyurethanes

      In order to prepare polyurethane elastomers with acceptable physical properties and good biocompatibility, novel polyurethane networks were synthesized via curing reaction of epoxy-terminated polyurethane prepolymers (EUPs) with hexamethylene diamine. EUPs were prepared from reaction of glycidol with NCO-terminated polyurethanes (ITPs). ITPs were also synthesized from reaction of one equi...

متن کامل

بررسی خواص مکانیکی و حرارتی کوپلی یورتان های بر پایه GAP-PPG با نسبت های متفاوت

For improving the mechanical and thermal properties of polyurethanes based on glycidyl azide polymer (GAP), a series of polyurethane elastomers with two soft segments were prepared from hexamethylene diisocyanate (HDI) / (GAP) / (PPG) /TMP and isophorone diisocyanate (IPDI) / GAP/ PPG/ TMP formulation. The weight ratio of soft segments GAP/PPG in polyurethane samples is changed as following ord...

متن کامل

Biostability of a New Cardiovascular Material

Introduction: Polyurethanes (PU) have long been used for biomedical applications due to their excellent mechanical properties and reasonable biocompatibility. However, polyether urethane elastomers are susceptible to biodegradation. Silicones are known to be biostable and biocompatible, making them an ideal replacement for the polyether soft segment of polyurethanes. As a result, a new silicone...

متن کامل

Polyurethane elastomers as maxillofacial prosthetic materials.

A series of polyurethane elastomers based on an aliphatic diisocyanate and a polyether macroglycol was polymerized with various cross-link densities and OH/NCO ratios. Stoichiometries yielding between 8,600 and 12,900 gm/mole/crosslink and an OH/NCO ratio of 1.1 resulted in polymers with the low modulus, yet high strength and elongation necessary for maxillofacial applications.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of materials science. Materials in medicine

دوره 16 12  شماره 

صفحات  -

تاریخ انتشار 2005