Control strategies for harmonic mitigation and power factor correction using shunt active filter under various source voltage conditions

This paper gives a new insight into the concept of load compensation using shunt active filter (SAF) under ideal and non-ideal source voltage conditions. A novel approach based on an improved instantaneous active and reactive current component method is proposed. The performance of the proposed control strategy has been compared with instantaneous reactive power theory, symmetrical component theory and dq theory. SAF has been realized by three-phase voltage source converter. Reference currents generated by control strategies has been tracked by a SAF in a hysteresis band control scheme. The performance of the proposed scheme is evaluated in terms of reactive power compensation, reduction in magnitude of source currents, compensator currents, and harmonic compensation as per IEEE-519 standard. To ascertain the viability of the proposed control algorithm, the performance is evaluated under different source voltage conditions with the IEEE Standard-1459 power definitions. Variation in magnitude as well as harmonic content of source voltage has been considered. Under balanced sinusoidal source voltage condition, all control strategies congregate to similar results. Under unbalanced sinusoidal source voltage condition, dq theory and proposed theory have shown similar performance. However, under distorted source voltage conditions, an improved instantaneous active and reactive current component theory presents superior performance. A three-phase, three-wire distribution system supplying non-linear load is considered for simulation study. Simulation results from a complete model of SAF are presented to validate and compare the control strategies. 2012 Elsevier Ltd. All rights reserved.