Submerged Liquid Plasma for the Synthesis of Unconventional Nitrogen Polymers

نویسندگان

  • Jaganathan Senthilnathan
  • Chih-Chiang Weng
  • Jiunn-Der Liao
  • Masahiro Yoshimura
چکیده

Glow discharge polymerization is not well understood due to the rapid/complex reaction at the plasma/gas precursor interface. Plasma reaction in a submerged condition allows post-plasma-polymerization, leading to further polymer growth and thus a stable structure. Electron collision with acetonitrile at the interface initiates the formation of radical monomers, which undergoes further rearrangement to form low-molecular (LM) nitrogen polymers (NPs). The radical-rich LM NPs go through further polymerization, forming stable high-molecular (HM) NPs (as determined using liquid chromatography/mass spectrometry). LM NPs absorb light at a wavelength of 270 nm (λ max) whereas HM NPs show absorption at 420 nm (λ max), as determined from ultraviolet-visible absorption spectra. The fluorescence spectra of HM NPs show characteristic emission at 430 nm, which indicates the presence of nitrogen functional groups with external conjugation. The proposed structure of HM NPs is verified with different analytical instruments.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Plasma can reduce Staphylococcus epidermidis biofilm formation on medical polymers

Medical polymers, such as urinary catheters are widely used biomaterials. One of the main problem for using the urinary catheters is biofilm formation on their surface, when they are used in a long time in the body. Virulence and pathogenicity of Staphylococcus epidermidis is often enhanced when growing as a biofilm. Many techniques have been presented to reduce the biofilm formation by surface...

متن کامل

The Synthesis of Carbon Nano Tubes by Arc Discharge Method in Liquid media

In this investigation a simplified arc discharge apparatus was used to synthesize mullti-wall carbon nanotubes. Because of not requiring vacuum equipment, heat exchange system, active or inert gases, this method is found to be cheaper and simpler than traditional arc discharge in gas environment. Using this method, CNTs are produced by performing an arc discharge between two graphite electrodes...

متن کامل

Large-scale synthesis of single-walled carbon nanohorns by submerged arc

We report on the synthesis of single-walled carbon nanohorns (SWNHs) by arc discharge between two graphite electrodes submerged in liquid nitrogen. The product in its powder form was found to consist of spherical aggregates with sizes in the range of 50–100 nm. The nanohorns are characterized by transmission electron microscopy (TEM), Raman and electron energy loss spectroscopies and surface ar...

متن کامل

Metalization of Polymers: Copper on Cyclotene

An analysis of the demands of ULSI and GSI technologies shows the necessity of multi-layer devices to reduction of signal transmission delay time. This reduction is realized by using a better conductor metal, such as Cu and a surrounding insulator with low capacity than actually used, such as Dow Cyclotene 3022. In this paper, the results of evaporated and sputtered Cu to Dow Cyclotene 3022 wer...

متن کامل

Metalization of Polymers: Copper on Cyclotene

An analysis of the demands of ULSI and GSI technologies shows the necessity of multi-layer devices to reduction of signal transmission delay time. This reduction is realized by using a better conductor metal, such as Cu and a surrounding insulator with low capacity than actually used, such as Dow Cyclotene 3022. In this paper, the results of evaporated and sputtered Cu to Dow Cyclotene 3022 wer...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره 3  شماره 

صفحات  -

تاریخ انتشار 2013